Top-rated floor polishers.

Get matched with top floor polishers in Hazelhurst, WI

Enter your zip and get matched with up to 5 pros

Need a pro for your floor polishing project in Hazelhurst, WI?

Select your specific project to find the pro for you.

Find Floor polishers in Hazelhurst

No results for Floor polisher in

Try adjusting your search criteria.
Floor Polishers questions, answered by experts

Before starting on a full refinishing project, determine if your floors need to be completely sanded down to the bare wood or if the damage is shallow and mostly cosmetic. Deep scratches and gouges will require you to rough sand using a drum sander or belt sander, but small surface scratches or floors that have only lost their luster don’t need a complete overhaul. Instead, you can skip the rough sanding step and sand-screen the old finish with a buffer, removing only the top layer of polyurethane.

You can mop bamboo floors, but exercise caution to protect the material from excess moisture, which can seep into the bamboo, causing it to warp and well. Moisten a microfiber mop and wring it out until it’s just damp, or use a pH-neutral cleaner, as this will prevent damage to the bamboo fibers. Avoid harsh chemicals, like traditional floor cleaners. After cleaning, wipe the floor dry.

The cost to polish floors averages around $200 per room, but you could pay anywhere from $100 to $300. Some factors that influence the total cost of floor polishing include the following:

  • Square footage of flooring

  • Type of floor 

  • Whether you need floor repairs done beforehand

  • Whether or not you want professional floor cleaning done beforehand

Since square footage is the most significant cost factor, you might get a more accurate estimate by using the average cost per square foot for floor polishing, which is between $1.00 and $2.50.

Yes, but with caution. A floor grinder is intended to level and polish concrete, so it is a very powerful tool. To remove paint, the floor grinder should be set to 35 square feet per minute or less to minimize the pressure without the use of pocket weights. You might need to go over the surface two times to get any paint that has sunk into the concrete’s pores.

Regular vacuuming, deep cleaning, and prompt stain removal help maintain appearance and durability.

The Hazelhurst, WI homeowners’ guide to floor polishing services

From average costs to expert advice, get all the answers you need to get your job done.