Get matched with top driveway gate pros in Cascade, WI

In most cases, you will need a permit to install a new driveway or property gate. An exception might be if you are simply replacing an existing gate. Before issuing a permit, your local municipality may require a site plan or survey to verify property lines and prevent encroachment on a neighbor's property. Permits for a gate typically cost under $100. Be aware that corner properties may have additional restrictions on gate height or style. It's wise to confirm permit requirements with your local building department or your gate installation company, which can usually handle the entire permitting process for you.

Fence gates sag because they have no support on the latch side of the gate to help hold them aloft. A gate wheel fixes that problem by providing support for that latch side. Remember that the ground must be level in front of the gate so the wheel can roll freely when you open and close it. If the terrain is uneven or slopes, a gate wheel won’t work.

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.

Other mechanisms can help you keep your gate securely shut. Secure gate latch types will do the job, such as magnetic or spring-loading, self-closing lever varieties, or automatic gate openers. However, they won’t control the speed at which the gate closes. You can purchase slam plates that use rubber buffers to reduce noise and the potential damage-inducing impact of a fast-closing, heavy gate.