Get matched with top holiday decorators in Barron, WI

If you only need strands in safe and easy-to-reach locations and are sure of your electrical system, you can probably purchase and install lights yourself. To do this, carefully test your outlets to ensure there aren’t any sparks or other concerning issues. Your budget might also influence this decision, as going the DIY route can be significantly cheaper.

If you need to visually inspect your Christmas lights to determine which are good and which need replacement, there are a few things to look for. First, look for discoloration, such as a dark spot or two on the inside of the glass. The spot is an indication of a burnt filament. Also, look for missing filaments, cracked bulb glass, and broken sockets.

The cost for professional holiday light installation averages around $430, with a typical range of $220 to $675. However, prices can be as low as $100 for simple projector setups or exceed $1,200 for extensive displays. The total cost depends on factors like the display's complexity, your home's size, labor rates in your area, and the type of lights used. For example, installation on a small, one-story home may cost $250 to $600, while a multi-story home over 4,000 square feet could cost $500 to $1,800. Costs can also be broken down by location (e.g., high roofs at $3.50–$6 per linear foot) or by the type of light strand, with prices ranging from $4 for basic incandescent strands to over $60 for color-changing LED strands.

Heavy amounts of snow could be a problem. In many climates, lots of snow on your rooftop can lead to freeze-thaw cycle that create ice dams, which can damage rooftops. But if you’re using shingle clips, this snow poses an additional problem: As it melts and freezes, it can easily dislodge clips you’ve placed on your roof.

You can clean snow off your roof after a fresh snowfall while it’s still lightweight, but brushing off snow can also dislodge your clips. If you get a lot of snow, then roof clips become less viable.