Best drain cleaners near Arkansaw, WI

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

If you're dealing with a clogged sink drain, you may be able to avoid removing the drain by using a plunger to dislodge the clog. While we associate plungers with toilets, they can do the same job with your sink drain. Be gentle, though, as forceful movements can push clogs further into your plumbing system and make them more difficult to remove. Additionally, make sure you’re using a sink plunger—with a flat bottom—and not a toilet plunger—which has a smaller bottom protruding from the larger flat piece.

With a one-way cleanout, you can access your sewer line from one direction. Depending on the way it curves, a plumber can either access the side of the pipe that goes into your home or the side that goes to your yard. On the other hand, two-way cleanouts allow pros to access both sides of the sewer line, thanks to their dual-pipe design (they’re usually U-shaped).

Applying drain cleaner is a common DIY solution to clogged drains, but it can be extremely harmful to your pipes and lead to corrosion and leaks. It is almost always better to try snaking a clog than using a drain cleaner, but the best solution is to hire a professional plumber. They can locate the clog and gauge the severity using a camera system and then decide if using a plumber’s snake, auger, or drain cleaner is the best option to remove the clog and limit damage to your plumbing system.