Top-rated structural engineers.

Get matched with top structural engineers in Colville, WA

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in Colville, WA?

Select your specific project to find the pro for you.

Find Structural engineers in Colville

Avatar for American Concrete N Masonary
American Concrete N Masonary
5.0(
6
)

Serving Colville, WA and surrounding areas

In business since 1990

Free estimates

Emergency services offered

"From the minute they got out of the truck to check our project, to give us a bid we knew they were the company we would hire. They seemed to know what we wanted by way of design and finish, before we spoke. Where other companies had said flat out “We won’t do this.” “Too much work removing old concrete.” Poor access.” Moli said, “Yes, this old concrete gotta go. But, it’s no problem. We bust it up. We take it out.” At the end of the first day all of the old concrete had been removed and taken away. At the end of day two all the forms were set. Day three was rebar and detail work making all ready for the pour. Day four The concrete was poured stamped and finished. On day five everything was picked up cleaned up and they were gone. These are good people. They do good work and they are as honest as the day is long."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+29

Recommended by100%of homeowners
Structural Engineering questions, answered by experts

Dormers must be able to bear the load of their own construction and the added window. The style of the dormer, however, will determine where the weight loads onto your home's structure. A gable dormer bears the weight on the side walls whereas a shed dormer bears it on the front walls.

You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it’s safest to drill and the width and depth of the bit that’s safe to use.

You need to hire a structural engineer when building or modifying any component with a structural load in your home. Common situations where you would need a structural engineer include home inspections when buying or selling a home, investigating possible issues with your foundation, beams, load-bearing walls, or chimneys, breaking ground on a new home or structure on your property, and renovating an old part of your home that could threaten any structural integrity. Home additions and bump-outs also require an engineer.

Absolutely, as it ensures designs are viable and won’t compromise structural integrity.

Yes, you can put a doorway in a structural wall; in fact, most exterior doors are set into structural walls. The project is a little more challenging than installing a door in a non-load-bearing wall because you need a structural engineer to assess the wall and make sure it’s safe to create a wall opening. Your engineer’s report will include instructions for your contractor on how and where to install additional supports, like steel headers above the door, to distribute the weight above to the wall on either side of the door.

The Colville, WA homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"