Get matched with top concrete cutting pros in Worcester, VT

Q: Can you use a saw to cut metal pipe?

• <div><p>Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.</p></div>

Q: Are hot water heaters good for scrap metal?

• <div><p>Since water heaters are primarily made of metal, they&rsquo;re commonly accepted by scrap yards and collectors. Don&rsquo;t expect to fetch a high price, though&mdash;water heaters are mostly steel and aluminum, which aren&rsquo;t high-value metals. Some components are made of more valuable metals, like brass and copper, but they&rsquo;re a small portion of the heater and won&rsquo;t affect the price much.</p></div>

Q: How do you cut rectangular ductwork?

• <div><p>Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective. </p><p>Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation. </p></div>

Q: How much does aluminum welding cost?

• <div><p>The cost to weld aluminum averages about <b>$14 to $22 per pound</b>. The type of metal factors into the overall cost of any welding project due to the cost of the materials and the expertise required to work with it. Some of the most common metals used by welders include:</p><ul><li><p>Magnesium alloy: $7&ndash;$16 per pound</p></li><li><p>Low-carbon steel: $11&ndash;$12 per pound</p></li><li><p>Stainless steel: $13&ndash;$15 per pound</p></li><li><p>Copper/brass: $24&ndash;$29 per pound</p></li><li><p>Cast iron: $38&ndash;$79 per pound</p></li><li><p>Titanium: $60&ndash;$85 per pound</p></li></ul><p></p></div>

Q: Can you cut a shipping container apart?

• <div><p>Yes, but you&rsquo;ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around &frac34; inch thick, so it&rsquo;s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your concrete cutting project in Worcester, VT?

Select your specific project to find the pro for you.

Verified Reviews for Concrete Cutting pros in Worcester, VT

*The Angi rating for Concrete Cutting companies in Worcester, VT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Concrete Cutting needs.

*The HomeAdvisor rating for Concrete Cutting companies in Worcester, VT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Concrete Cutting needs.

Last update on October 31, 2025

Reviewed in October 2025
MY PROPERTY MANGER WOULD REHIRE THEM AGAIN: VERY PROFESSIONAL KNOW THEIR PROFESSION AND EVEN DID MORE THAN WAS QUOTED AT THE SAME PRICE OF THE BID. THEY QUOTED FOR A SIX HOUR JOB AND HAD EXTRA TIME AND CUT DOWN MORE DEAD TREES
Tree Frog Outdoor
Request a quote
Reviewed in January 2024
James came and installed flooring, and set up some hanging shelves on my concrete wall. He was very knowledgeable and got the work done efficiently and quickly! I will definitely be hiring him for my next project soon.
Bognar Home Solutions LLC
Request a quote
Reviewed in March 2023
Richie was very friendly and eager to please. I was surprised that he did not seem to have equipment to tow away the tree branch, once he hauled it to the requested area. In his defense, he told me the cheapest way to deal with the tree was to just sever it and haul it aside, rather than...
Yaad Man Landscaping LLC
Request a quote
Reviewed in September 2022
John and his team installed a concrete pad and pavers for our new hot tub and patio. They provided professional and friendly service and had the job done in no time. Everything looks great and I will hire them again!
Hovnanian Landscape Excavation
Request a quote
Reviewed in August 2020
We are very pleased with our new roof from Sejay Construction! When we first set out to have a new roof installed our motivation was to ensure that we had a sound roof headed into the winter. In hiring Ricky and his team, the end result was an impeccably installed roof that also makes our house...
SEJAY CONSTRUCTION LLC
Request a quote
Reviewed in July 2020
After an initial misunderstanding, they did a great job removing a dead sugar maple tree. They had equipment so the tree didn't even hit the ground when cut down. I would hire them again in a minute.
Farr's Tree Service, Inc.
Request a quote
Reviewed in March 2020
For the high price CMC is not the quality work I was looking for. They are great for mid level quality work but not for high end jobs. Large chips and dings were all over the finished edging/trim and jam pieces. There were jam pieces that were cut short resulting in far too big of a caulking...
CMC Hardscape Landscape
Request a quote
Reviewed in July 2015
It required removing old unit and cutting a hole to install a metal junction box to make the unit up to code. He was on time and <br /> professional. I would recommend him to anyone looking for a competent job. <br />
Draper Electric
Request a quote
Reviewed in June 2015
First time user of HomeAdvisor, so I was a little apprehensive, especially since Jorge uses a pressure washing system to clean the gutters and I had doubts as to whether this approach could really clean out the accumulated leaves, branches (and growing plants!). He showed up 5 minutes early,...
Shines Pressure Washing
Request a quote
Reviewed in November 2012
They gave a really thorough estimate and seemed to know what they were talking about. I contacted them with a million questions after the estimate and they patiently went through them. Then they came back for a second estimate with my brother in law there who pours concrete and reduced the price...
Northern Basement Systems
Request a quote

Find Concrete cutting pros in Worcester

Pat's Concrete Cutting, LLC

4.3(

)

Concrete - Sawing or RemovalConcrete - Sawing or Removal- For BusinessConcrete Flatwork - Repair & Resurface

Serving Worcester, VT and surrounding areas

Approved

In business since 2019

Free estimates

Credit card accepted

"they did a wonderful job of keeping the place clean and the cutting was very precise"

Response time1 day

Recommended by100%of homeowners

Request Quote

C&L Cass Construction

2.8(

)

Concrete - Sawing or RemovalConcrete Flatwork - Repair & Resurface

Serving Worcester, VT and surrounding areas

Approved

Small jobs welcome

Offers commercial services

Customers say: Quick response

"Chris worked with my schedule to get a foundation in and also fixed up my driveways, made great suggestions. He showed up and completed the work exactly as he promised and kept the site tidy all through the project. A pleasure to work with!"

2 neighbors recently requested a quote

Recommended by100%of homeowners

Concrete - Sawing or RemovalConcrete - Sawing or Removal- For BusinessConcrete Flatwork - Repair & Resurface

Serving Worcester, VT and surrounding areas

Approved

Free estimates

Emergency services offered

Small jobs welcome

"I was very pleased with the work he did, he has a nice way of explaining things , I sure I will hire him again for other projects when needed he is a very pleasant person to deal with. Tank you Scott for being such a nice guy ."

24 neighbors recently requested a quote

Concrete - Sawing or RemovalConcrete - Sawing or Removal- For Business

Serving Worcester, VT and surrounding areas

In business since 2006

Free estimates

Offers commercial services

"Bruce is great to work with, He communicates well. I will defiantly hire him again for another project."

Response time1 day

Response rate89%

Recommended by100%of homeowners

Request Quote

Green Mountain Basement Solutions LLC

4.0(

)

Concrete - Sawing or RemovalConcrete - Sawing or Removal- For BusinessConcrete Flatwork - Repair & Resurface

Serving Worcester, VT and surrounding areas

In business since 2007

Free estimates

Emergency services offered

"Mike was able to fit me in the same day for an estimate which surprised me because I'm sure a lot of people are needing his services with all the rain lately but he was in the area that day and came by. Although the company is a nation wide chain, its a franchise and a small business. He is an honest Vermonter with Vermont values which I appreciate. He gave me options but didn't try to talk me into something I couldn't afford and is doing the work within two weeks which I was also happy about being a very busy time for this type of thing."

Recommended by75%of homeowners

Request Quote

Big Dog Property Management LLC

5.0(

)

Concrete - Sawing or RemovalConcrete - Sawing or Removal- For Business

Serving Worcester, VT and surrounding areas

In business since 2021

Free estimates

Credit card accepted

"Big Dog Property Management performed various land clearing, trenching and foundation services for us. Kyle's work exceeded our expectations and was affordable. He made the extra effort to work with us in understanding our goals and working around our schedules. We'll use Big Dog again for future work."

+70

Recommended by100%of homeowners

Request Quote

Vermont Precision Contracting

4.9(

)

Concrete - Sawing or RemovalConcrete - Sawing or Removal- For Business

Serving Worcester, VT and surrounding areas

Free estimates

Emergency services offered

Credit card accepted

"They were great, on time, super professional, and the work was outstanding. Also, they cleaned up after they did the job."

+17

Recommended by100%of homeowners

Concrete - Sawing or RemovalConcrete - Sawing or Removal- For BusinessConcrete Flatwork - Repair & Resurface

Serving Worcester, VT and surrounding areas

In business since 2017

Free estimates

Emergency services offered

"Superb. They're excellent all around. Easy to work with."

+14

Recommended by100%of homeowners

Request Quote

R.A.M. Contracting, Inc.

3.8(

)

Concrete - Sawing or RemovalConcrete - Sawing or Removal- For BusinessConcrete Flatwork - Repair & Resurface

Serving Worcester, VT and surrounding areas

In business since 1998

Free estimates

Emergency services offered

"The company representative stated to me that they only do commercial properties and not residential homes. I was not aware of that from the company's description. They did respond to my calls."

Response time1 day

Recommended by100%of homeowners

Concrete Flatwork - Repair & Resurface

Serving Worcester, VT and surrounding areas

In business since 2020

Free estimates

Small jobs welcome

"They did great work! They were efficient and very respectful."

Response time10 hrs

Recommended by75%of homeowners

Request Quote

Showing 1-10 of 18

Concrete Cutting questions, answered by experts

Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.

Since water heaters are primarily made of metal, they’re commonly accepted by scrap yards and collectors. Don’t expect to fetch a high price, though—water heaters are mostly steel and aluminum, which aren’t high-value metals. Some components are made of more valuable metals, like brass and copper, but they’re a small portion of the heater and won’t affect the price much.

Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective.

Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation.

The cost to weld aluminum averages about $14 to $22 per pound. The type of metal factors into the overall cost of any welding project due to the cost of the materials and the expertise required to work with it. Some of the most common metals used by welders include:

Magnesium alloy: $7–$16 per pound
Low-carbon steel: $11–$12 per pound
Stainless steel: $13–$15 per pound
Copper/brass: $24–$29 per pound
Cast iron: $38–$79 per pound
Titanium: $60–$85 per pound

Yes, but you’ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around ¾ inch thick, so it’s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.

The Worcester, VT homeowners’ guide to concrete cutting services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Stephanie Mickelson
•
Apr 4, 2026Apr 4, 2026
How Much Does It Cost to Cut a Concrete Wall for a Door? [2026 Data]
Looking to add utility and easier access to your basement? Use this guide on the cost to cut a concrete wall to add a door to your basement.
Xiao Faria daCunha
•
Jul 10, 2026Jul 10, 2026
How Much Does Concrete Removal Cost? [2026 Data]
Time to get rid of that old chipped and crumbling walkway? Concrete removal costs can add up, but you have options to simplify the process. Learn more here.
Haley Nothstein
•
Jul 15, 2026Jul 15, 2026
How Much Do Poured and Precast Concrete Walls Cost? [2026 Data]
Discover how much concrete walls cost based on factors like their size, material, location, design, and local labor rates.
Dan Simms
•
May 3, 2026May 3, 2026
How to Cut Concrete for All Skill Levels
Cutting concrete is a daunting task unless you have the right tools and know-how. Find out the methods for how to cut concrete for all skill levels.
Dan Simms
•
Jul 9, 2026Jul 9, 2026
How to Cut Concrete Pavers: 3 Methods to Do the Job Correctly
Have a paver patio project and need to know how to cut concrete pavers? Find out all the DIY options you have for getting your pavers to fit properly.
Dan Simms
•
Jul 9, 2026Jul 9, 2026
Ultimate Concrete Tools List for Your Home Projects
Looking to tackle concrete projects in and around your home? Use this concrete tools list to make sure you have the right tools to get the job done.