Get matched with top woodworkers in Townshend, VT

Q: How can I find ceiling joists using simple tools like a hammer or a nail?

• <div><p>Yes, you can find ceiling joists using simple tools if a stud finder isn't available.</p><p>Using a hammer requires patience and a keen ear. Gently tap the ceiling in a grid pattern, listening for sound changes. A hollow sound indicates space between joists, while a solid, dull thud suggests a joist. Mark the location with a pencil and confirm by tapping from different angles.</p><p>Alternatively, you can use a nail, but this method will leave small holes. You'll feel increased resistance when the nail hits a joist. Mark the spot and repeat the process every 16 or 24 inches to map the joist locations. This method is considered less reliable than using a stud finder.</p></div>

Q: Is it normal for a contractor to ask for a down payment, and how much should you pay up front?

• <div><p>It is common for a contractor to ask for a down payment before starting a project, especially for jobs that require purchasing materials and equipment or hiring a crew. The deposit amount can range from 10% to 50% of the total job cost. While a request for up to 50% is not unusual, a contractor should not ask for more than that, and you should never pay for a project in full before the work has begun. To protect yourself, always discuss payment terms before starting and have a written contract that outlines the project timeline and expectations. Additionally, be sure to hire reputable contractors and check their licensing and insurance before the project begins.</p></div>

Q: What tools and blades are needed to cut Corian?

• <div><p>Yes, Corian&reg; and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.</p><p>For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.</p><p>After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.</p></div>

Q: What are the spindles on a deck called?

• <div><p>Spindles on a deck may also be called balusters or pickets. While not as important to the structural support of the deck as the rail posts, they play a critical role in ensuring the deck is safe to use by closing in large gaps in the railing. For this reason, balusters must be no more than 4 inches away from one another.</p></div>

Q: Are beams and joists the same?

• <div><p>No, beams are the primary load-bearers for flooring or roofing systems, and they distribute the weight of the structure to your foundational supports, while joists bear far less weight and distribute their loads to the beams. Beams are usually thicker and longer, and they have support posts or foundation walls beneath them for support.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Townshend, VT?

Select your specific project to find the pro for you.

Verified Reviews for Woodworking pros in Townshend, VT

*The Angi rating for Woodworking companies in Townshend, VT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

*The HomeAdvisor rating for Woodworking companies in Townshend, VT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

Last update on August 23, 2026

Reviewed in August 2026
Omar gave me a fair and realistic price for a fireplace stainless steel pipe, a furnace stainless steel pipe, full masonry work on the chimney, flashing around the chimney and capping each pipe. Omar and his crew came in and finished in one day. They were very professional, clean and efficient....
McBriens Fire & Flue
Request a quote
Reviewed in May 2026
My 200+ year old colonial home needed not only painting but also shutter repair and some clapboard and corner board replacement. Missi did it all with a crew who were skilled, thorough, and efficient. Speaking as an 80+ widow, they took a load of worry off my mind and i would hire them again...
Missi Painting
Request a quote
Reviewed in March 2026
Tristan built a custom entryway bench with storage that fits our space well. Quality is fantastic and the price was fair. Communication was smooth from start to finish. I’ll be calling him again for the next project.
Fourniers Home Services
Request a quote
Reviewed in September 2025
Cornerstone Excavation did a great job definitely recommend.
Cornerstone Excavation LLC
Request a quote
Reviewed in September 2024
Luxstonecare did a great job updating our warehouse markings. The team was punctual and professional, delivering precise and vibrant lines. There was a minor uneven spot, but overall, the work was efficient and met our expectations. Good value and excellent customer service. Would recommend!
luxstonecare LLC
Request a quote
Reviewed in May 2024
Great! It was a pleasure to work with Brad at Green Mountain Design Build. He did a fantastic job renovating two bathrooms as well as several bedrooms and a basement room at our house. Brad is highly professional and reliable and he has excellent design advice
Green Mountain Design Build
Request a quote
Reviewed in April 2024
Very impressed with the service provided. All calls and appointments were done at a timely fashion from beginning to end. They were very pleasant and patient explaining the work process. Their repair work exceeded my expectations, I would highly recommend this company. Thank you Ellite...
Ellite Construction Masonry
Request a quote
Reviewed in April 2023
Very knowledgeable and dependable. Took down trees and limbs and cleaned up after
Osborne Excavating & Property Maintenance, LLC
Request a quote
Reviewed in September 2021
Thomas repaired a broken strut on an antique rocking chair. He was very quick, resourceful, and effective. He did the job promptly, on the spot, and with no fuss. He was very considerate in calling, keeping his appointment, and following up.
Reliable Painters
Request a quote
Reviewed in July 2021
Erich and Kestrel saved the day. We were in the process of relocating our one-room schoolhouse onto a new foundation, and the entire project hinged on the deconstruction of an abutting woodshed. Within hours, Deconstruction Works carefully disassembled, labeled, and sorted all of the lumber for...
Deconstruction Works
Request a quote

Find Woodworkers in Townshend

Paul Kobyluch Craftsman

4.8(

)

Furniture - Build CustomCustom Cabinets - Build

Serving Townshend, VT and surrounding areas

Approved

In business since 1985

Free estimates

Offers commercial services

"Paul was amazing - truly exceeded our expectations for the built ins around our fireplace that he helped design. They have changed the whole room, we could not be happier!"

Response time11 hrs

Response rate96%

1 neighbors recently requested a quote

Request Quote

Tejada's Remodeling Inc

4.7(

)

Closet - Build

Serving Townshend, VT and surrounding areas

Approved

Super Service Award Winner

In business since 2024

Free estimates

Warranties offered

"I was very impressed working with this company. Communication was superb right off the bat. We went over the job in detail, and it was completed perfectly. The company is very professional and pays attention to every detail. The price was good too! They also cleaned the area thoroughly and my property looks exquisite. Hire this company with confidence. Thank you!"

Response time2 days

Response rate100%

9 neighbors recently requested a quote

Wood Stairs and Railings - Install or ReplaceArbor, Pergola or Trellis - Build CustomCarpentry Framing - Repair+2 more

Serving Townshend, VT and surrounding areas

Approved

In business since 2024

Free estimates

Emergency services offered

"Tanner was great. Installed the stairs I asked for at a very reasonable price and did a fantastic job. Then demo a shed I had on the property and cleaned up everything. Couldn't be happier"

Response time6 hrs

6 neighbors recently requested a quote

Gazebo or Freestanding Porch - RepairGazebo or Freestanding Porch - Repair - For BusinessInterior Trim and Decorative Moldings - Repair

Serving Townshend, VT and surrounding areas

Approved

In business since 1999

Free estimates

Credit card accepted

"These guys are the BEST! Fast, efficient, good natured, innovative and the highest quality of craftsmanship! Project started just to fix woodshed, however it was too far gone so it came down. I saw visions of new project same time Ian did. He drew up plans the next day and I now have a woodshed and screened in back porch. I wanted them to preserve the integrity of my old house and use as much from the old woodshed as possible, barn siding, windows and church pews that came out of the house when converted from a church in 1836. So amazing! Thank you!"

+68

Response time1 day

Recommended by100%of homeowners

Request Quote

Green Mountain Design Build

5.0(

)

Carport (Wood) - Build

Serving Townshend, VT and surrounding areas

Approved

In business since 2020

Free estimates

Warranties offered

"It was a wonderful and stress free project. Brad was on point, on time and on budget with the entire project. Great communication and super knowledgeable."

+18

Response time5 days

4 neighbors recently requested a quote

Recommended by100%of homeowners

Request Quote

Calvary Custom Builders, LLC

4.3(

)

Carpentry Framing - InstallCarpentry Framing - RepairCarport (Wood) - Build+3 more

Serving Townshend, VT and surrounding areas

Approved

In business since 2005

Free estimates

Emergency services offered

"They do outstanding work, very professional and honest."

+103

Response time5 days

1 neighbors recently requested a quote

Recommended by100%of homeowners

Arbor, Pergola or Trellis - Build CustomArbor, Pergola or Trellis - Build Custom - For BusinessCarpentry Framing - Install+9 more

Serving Townshend, VT and surrounding areas

Approved

Small jobs welcome

I'm currently looking for some fill in work for this winter. I'm a very capable carpenter/painter. I have full time work Monday through Friday, but have some availability on weekends.

Request Quote

RJs Landscape & Excavation

5.0(

)

Arbor, Pergola or Trellis - Build CustomArbor, Pergola or Trellis - Build Custom - For Business

Serving Townshend, VT and surrounding areas

Approved

Free estimates

Emergency services offered

Credit card accepted

"Great communication Prompt and completed the project completely. I would definitely use this company again and highly recommend them!"

29 neighbors recently requested a quote

Carpentry Framing - InstallCustom Cabinets - Build

Serving Townshend, VT and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

23 neighbors recently requested a quote

Carpentry Framing - RepairCloset - BuildGazebo or Freestanding Porch - Repair+4 more

Serving Townshend, VT and surrounding areas

Approved

Free estimates

Small jobs welcome

"Adam and his team did an amazing job on completing a backyard fence for my family. He was hardworking and detailed with the work. Kept me updated through every step of the way from the permit process, ordering materials and check-ins as the build was happening. Our fence is great! He also completed a custom railing and gate to attach to our existing deck. Will definitely be using we do it all again for future projects."

1 neighbors recently requested a quote

Request Quote

...

Showing 1-10 of 92

Woodworking questions, answered by experts

Yes, you can find ceiling joists using simple tools if a stud finder isn't available.

Using a hammer requires patience and a keen ear. Gently tap the ceiling in a grid pattern, listening for sound changes. A hollow sound indicates space between joists, while a solid, dull thud suggests a joist. Mark the location with a pencil and confirm by tapping from different angles.

Alternatively, you can use a nail, but this method will leave small holes. You'll feel increased resistance when the nail hits a joist. Mark the spot and repeat the process every 16 or 24 inches to map the joist locations. This method is considered less reliable than using a stud finder.

It is common for a contractor to ask for a down payment before starting a project, especially for jobs that require purchasing materials and equipment or hiring a crew. The deposit amount can range from 10% to 50% of the total job cost. While a request for up to 50% is not unusual, a contractor should not ask for more than that, and you should never pay for a project in full before the work has begun. To protect yourself, always discuss payment terms before starting and have a written contract that outlines the project timeline and expectations. Additionally, be sure to hire reputable contractors and check their licensing and insurance before the project begins.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

Spindles on a deck may also be called balusters or pickets. While not as important to the structural support of the deck as the rail posts, they play a critical role in ensuring the deck is safe to use by closing in large gaps in the railing. For this reason, balusters must be no more than 4 inches away from one another.

No, beams are the primary load-bearers for flooring or roofing systems, and they distribute the weight of the structure to your foundational supports, while joists bear far less weight and distribute their loads to the beams. Beams are usually thicker and longer, and they have support posts or foundation walls beneath them for support.

The Townshend, VT homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Mar 18, 2026Mar 18, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
Lauren Bongard
•
Jul 9, 2026Jul 9, 2026
How Much Does It Cost to Refinish Stairs? [2026 Data]
Refinishing stairs is a great way to spruce up one of a home's most dominant focal points. High-quality wood should be allowed to shine. Learn the cost to refinish stairs in this guide.
Angi
•
Aug 17, 2026Aug 17, 2026
Built-In Bookshelf Building: Everything You Need to Know
Want to upgrade your home with custom shelving? Learn about built-in bookshelf building costs, design options, and how to hire a local carpentry pro.
Audrey Bruno
•
Aug 1, 2026Aug 1, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Bookshelf Building Pro
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.
Kristin Salaky
•
Aug 4, 2026Aug 4, 2026
How to Choose the Right Sandpaper Grit for Your Project
Sandpaper has a plethora of uses, which is why there are so many options. Learn about the various sandpaper grits to choose the right grit for the project.