What is a good CFM for a range hood?

• <div><p>Most residential range hoods have a CFM between 200 and 600. A higher CFM means your range hood is better at removing smoke and odors from your kitchen. The measurement ultimately depends on your stove’s width and heat output as well as the size of your kitchen. </p><p>Compared to the average size of a stove and kitchen, 350 CFM would be the minimum recommended rating for the average kitchen. However, selecting a higher CFM range hood would guarantee better ventilation to match your cooking habits, whether they’re minimal or extensive.</p></div>

What type of duct is best for venting a range hood?

• <div><p>Smooth galvanized metal ducting is best and safest for venting a hood range. It’s best to avoid flexible and corrugated types of ducting, as these options don’t provide ample airflow and may not meet local code. For specific advice on which type of duct might be best for your kitchen, reach out to a range hood installation professional.</p></div>

Get matched with top chimney cap pros in Swanton, VT

Q: Why hire a professional for range hood installation?

• <div><p>Ensures safe electrical connections and proper venting, improving kitchen air quality.</p></div>

Q: Do range hoods need to be vented outside?

• <div><p>No, range hoods do not necessarily have to be vented outside. Ductless or non-vented range hoods are available, which are common in condos or small kitchens where connecting to external ductwork isn't feasible. These hoods operate by taking in air, filtering it through charcoal filters to help eliminate smoke and odors, and then recirculating the cleaned air back into the kitchen. However, while these recirculating hoods are more versatile, venting to the outside is still the preferred and more effective method for completely removing smoke, odors, and gases from the room.</p></div>

Q: How long does it take to install a range hood?

• <div><p>Typically 1-2 hours, factoring in ductwork and electrical connections.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your chimney cap service project in Swanton, VT?

Select your specific project to find the pro for you.

Verified Reviews for Chimney Cap Service pros in Swanton, VT

*The Angi rating for Chimney Cap Service companies in Swanton, VT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Chimney Cap Service needs.

*The HomeAdvisor rating for Chimney Cap Service companies in Swanton, VT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Chimney Cap Service needs.

Last update on August 09, 2022

Reviewed in August 2022
They installed 2 liners and resurfaced,capped, repaired my chimney.Had a issue.Worked out.Fantastic job!Great team of workers!Highly recommend to do work for anyone!ð ð
Hearth & Stone Restoration
Request a quote
Reviewed in March 2021
Went above and beyond. Will not hesitate to hire them for future jobs. Did excellent brick work and flashing repair/replacement. Very knowledgeable and professional. I was very pleased and would highly recommend Chimney Warriors to anyone if they need chimney service.
Chimney Warriors, LLC
Request a quote
Reviewed in January 2018
I wasnt ready to hire a chimney sweep at the time of this research. Trying to clean my list of reviews needed up.
Brickliners Corp.
Request a quote
Reviewed in October 2015
I couldn't have asked for a better experience and outcome. Dave responded to my request for an estimate within 24 hours and we set up a time for the following day. He arrived on time and got down to business measuring, examining and taking pictures of the roof. 15 minutes later he educated me as...
AATEK INC
Request a quote
Reviewed in June 2015
I have a small project where my chimney needs to be powerwashed. Oliver will fit me in when he can because my chimney is in very good shape it is not crucial to have it done immediatley.I will write a review after the work is done. Dan B St Albans
Oliver Stone
Request a quote
Reviewed in March 2015
They were very nice. Scheduling was very easy. They came out to do an inspection and give an estimate. Everyone was very respectful and business-like. However, we have yet to use the deal. They explained, in detail, what they thought needed to be done and took pictures of the inside of the...
Chimney Savers Builders Inc
Request a quote
Reviewed in December 2011
This spring Mr. Derry quoted removing existing shingles, adding new drip edge and standing seam metal for our house and porch. This was to also include getting rid of the old shingles. He explained the cost in detail including cost of each valley (2) and going around 2 skylights. He advised that...
Bryan L. Derry Carpentry & Woodworking
Request a quote
Reviewed in December 2010
He was very courteous and capable. Was prompt with all work and even though we had some severe weather which did slow progress, he stayed within his estimate. Added extra flashing around the chimney to prevent any water intrusion which was not part of original contract and did not charge any...
David Desroches Construction
Request a quote
Reviewed in June 2008
I authorized Mr. Schump to repair the damage to the crown of the chimney. I was a little suspicious because I had had the chimney cleaned 2 months earlier and that company didn't report any problem. Mr. Schump returned approximately two weeks later and applied some type of cement sealer to the...
D&S CHIMNEY SPECIALISTS
Request a quote

Find Chimney cap pros in Swanton

Chimney Cap - Install or Replace

Serving Swanton, VT and surrounding areas

In business since 2000

Free estimates

Emergency services offered

"They came to clean chimney and give me a quote. They were super friendly and gave me a great price. They were able to do the work immediately! Highly recommend Shamrock Chimney"

+43

Recommended by60%of homeowners

Request Quote

One tile and masonry

New to Angi

Chimney Cap - Install or Replace

Serving Swanton, VT and surrounding areas

In business since 2004

Free estimates

Warranties offered

One Tile and Masonry LLC. was founded in May of 2004. It is our mission to guarantee\nthe highest quality installation of eclectic Tile and Masonry to Vermont's proud people. \nWe work very closely with our clients so we can provide an atmosphere of Success. \nSuccess that leads to the fulfillment of Quality Tile and Masonry installations.

Request Quote

Chimney Caps questions, answered by experts

Most residential range hoods have a CFM between 200 and 600. A higher CFM means your range hood is better at removing smoke and odors from your kitchen. The measurement ultimately depends on your stove’s width and heat output as well as the size of your kitchen.

Compared to the average size of a stove and kitchen, 350 CFM would be the minimum recommended rating for the average kitchen. However, selecting a higher CFM range hood would guarantee better ventilation to match your cooking habits, whether they’re minimal or extensive.

Ensures safe electrical connections and proper venting, improving kitchen air quality.

Smooth galvanized metal ducting is best and safest for venting a hood range. It’s best to avoid flexible and corrugated types of ducting, as these options don’t provide ample airflow and may not meet local code. For specific advice on which type of duct might be best for your kitchen, reach out to a range hood installation professional.

No, range hoods do not necessarily have to be vented outside. Ductless or non-vented range hoods are available, which are common in condos or small kitchens where connecting to external ductwork isn't feasible. These hoods operate by taking in air, filtering it through charcoal filters to help eliminate smoke and odors, and then recirculating the cleaned air back into the kitchen. However, while these recirculating hoods are more versatile, venting to the outside is still the preferred and more effective method for completely removing smoke, odors, and gases from the room.

Typically 1-2 hours, factoring in ductwork and electrical connections.

The Swanton, VT homeowners’ guide to chimney cap services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Apr 6, 2026Apr 6, 2026
How Much Does a Chimney Cap Replacement Cost? [2026 Data]
Find out the average chimney cap replacement cost, key price factors, and ways to save and budget for your chimney cap project.
Paige Bennett
•
May 30, 2026May 30, 2026
How Much Does It Cost to Seal a Chimney? [2026 Data]
Sealing your chimney is one of the most affordable ways to prevent water from penetrating the bricks. This guide breaks down the cost to seal a chimney.
Barbara Bellesi Zito
•
Mar 17, 2026Mar 17, 2026
How Much Does Chimney Crown Repair Cost? [2026 Data]
The average cost to repair or replace a chimney crown depends on the damage, material, and any other chimney maintenance services bundled into your project.
Deirdre Sullivan
•
Jul 8, 2026Jul 8, 2026
The Six Best Chimney Caps, Including Pros and Cons
We break down the types of chimney caps, including the pros and cons associated with each one, plus additional information homeowners should know.
Jill Harness
•
Jul 9, 2026Jul 9, 2026
What Is a Chimney Cap, and Why Do You Need One?
Not all chimneys have caps, but most fireplaces can benefit from having one. But what is a chimney cap, and why is it important? Our guide breaks it all down.
Amy Freeman
•
Jul 9, 2026Jul 9, 2026
Flue Cap vs. Chimney Cap: What’s the Difference?
Flue cap vs. chimney cap—how do you know which one you need? Learn more about the differences between a flue cap and chimney cap.