Get matched with top garbage collectors in Patrick Springs, VA

Most garbage disposals have a reset button that can be triggered with a tool as simple and accessible as your index finger. That said, if you need to perform a more in-depth troubleshooting step, like manually moving the arms inside the unit or rotating the impeller plate, a hex wrench is the most common tool you’ll need. Most garbage disposals come with a hex wrench.

While unplugging your garbage disposal and plugging it back in may help, most units have an actual reset button, a bright red switch found on the underside of your unit. If your garbage disposal needs resetting, you may notice this button sticking out about a quarter of an inch from the surface of the unit, with which it’s usually flush. Simply depress this reset button to reset the unit, and then test to ensure it’s working about 10 minutes later.

In some cases, it’s more cost-effective in the long run to replace a garbage disposal, but it depends on the specific issue you’re having and the age of your disposal. You should ask a garbage disposal repair tech for a quote to repair your appliance and then see if it would be more worthwhile to replace it. Additionally, garbage disposals last for around 15 years, so if you know your appliance is reaching that age, it’s likely better to pay for a new garbage disposal rather than sink money into repairs.

If your garbage disposal powers up and you can hear it hum, but the arms inside aren’t moving, the problem might be a stubborn clog, a build-up of grease, or a jam of the impeller plate. To troubleshoot these, ensure your unit is off and disconnected from its power source before checking inside the drain or attempting to manually rotate the impeller arms or plate from the underside of the unit. A hex wrench can help.