Get matched with top dishwasher installation pros in Hampton, VA

Water may linger at the bottom of your dishwasher if the cycle is interrupted or if there’s a clog in the system. Begin by pressing and holding the cancel button to ensure the cycle finishes. You may need to check the filter, hose, air gap, and garbage disposal for clogs if it still doesn't drain. If the problem persists and there is no visible clog, a professional will need to assess and fix the problem for you.

Your dishwasher drains through a hose that attaches to the plumbing below your sink or snakes out the back of your machine. In most cases, you can access one side of the hose from below your sink, as it usually ties into the same drainline that your sink uses. Otherwise, you may need to pull the dishwasher out of the counter to access it.

Local plumbing codes and manufacturer recommendations typically dictate the minimum distance between a sink and a dishwasher. This is generally 18 to 24 inches, providing enough room for easy loading and unloading of dishes without hindering the sink's function. Maintaining this separation not only adds convenience but also reduces the chances of water damage and optimizes plumbing connections.

Water is sitting at the bottom of your dishwasher, likely because the filter is dirty with food debris or because the drain hose has a clog. If the water is still sticking around after following the steps above, it’s time to contact a local plumber.