Get matched with top brush chipping pros in Gladys, VA

The easiest way to remove bushes is first to cut the bush down. You may need to use a handsaw, pruning shears, or a chainsaw for thicker branches. Once you’ve removed most of the branches, you can then cut the base of the shrub as low to the ground as you can get. Then, with a shovel, dig around until you expose the roots. Dig out the roots, being careful not to leave any roots in the soil.

While a rented dumpster can handle a wide variety of materials, there are significant restrictions on what is allowed. Generally, you can dispose of most non-hazardous household junk, yard waste, and construction debris.

Accepted items typically include:

• Furniture, carpets, old linens, and toys

• Wood and yard debris

• Small appliances and excess trash

• Renovation waste like old finishes, building debris, and roofing materials (unless they contain lead paint or asbestos)

However, you cannot put toxic, flammable, or hazardous materials in a dumpster. Prohibited items almost always include:

• Paint, gasoline, oil, and other fuels

• Household cleaners and other chemicals

• Electronics, batteries, and tires

• Refrigerators, hot water tanks, and medical waste

Since regulations can vary by location and company, it is essential to check with your dumpster rental provider for their specific list of accepted and prohibited items before you begin.

Using a truck to remove a bush falls into the category of “just because you can, doesn’t mean you should.” While it is possible to use a truck to pull out a bush, if you don’t have the right equipment, if you’re not familiar with attaching things to your vehicle correctly, or if you don’t have enough room, it’s a risky option. To prevent damage to your vehicle, it’s worth using tools made for the job of digging and cutting roots instead.

If you are xeriscaping a lawn from scratch, your best bet for preparing the lawn is to work with a xeriscaping specialist in your area. The most common first step to making the transformation, however, will be to remove the turfgrass from your lawn. The subsequent steps will often include amending the soil to support new plants and installing low-drip or drip irrigation systems.