What tools and blades are recommended for cutting Corian?

• <div><p>Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.</p><p>The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.</p><p>It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.</p><p>Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.</p></div>

Best stone countertop pros near Thatcher, UT

Q: Can I put a hot cup of coffee on quartz?

• <div><p>Your morning mug of coffee won&rsquo;t instantly damage your quartz countertop, but it&rsquo;s still wise to play it safe. While quartz can handle brief heat, repeated exposure can wear down its finish over time. Using a coaster adds a simple layer of protection and helps keep your surface looking fresh.</p></div>

Q: Is it normal to have seams in granite countertops?

• <div><p>There are many <a href="https://www.angi.com/articles/what-are-benefits-granite-countertop.htm">benefits of granite countertops</a>, but it&rsquo;s not unusual for them to have seams&mdash;especially if you&rsquo;re working with small slabs joined together. Seams are common on larger islands where the installer needs to use more than one granite slab to cover the surface. Luckily, because seams are normal in granite countertops, pros know how to hide them properly, so you&rsquo;d never know they were there. </p></div>

Q: At what angle should I cut my countertop?

• <div><p>The angle at which you cut countertops depends on the material, your intended outcome, and the location of the cut. For example, rather than cutting a straight 90-degree angle for internal corners, cut edges at a 45-degree angle to give a clean, professional look. For outside edges, most homeowners want squared-off sides, so 90-degree angles can make the most sense there. Because you want to get angles exactly right to minimize seams and eliminate the need for patching, be sure to measure several times before cutting and use the right equipment to get sharp, accurate angles.</p></div>

Q: What tools and blades are recommended for cutting Corian?

• <div><p>Yes, Corian&reg; and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.</p><p>The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.</p><p>It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.</p><p>Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.</p></div>

Q: What types of surfaces can artwork or shelves be mounted on?

• <div><p>Installations can be done on drywall, plaster, brick, concrete, and tile, with specialized anchors or fasteners as needed.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your stone countertop service project in Thatcher, UT?

Select your specific project to find the pro for you.

Verified Reviews for Stone Countertop Service pros in Thatcher, UT

*The Angi rating for Stone Countertop Service companies in Thatcher, UT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Stone Countertop Service needs.

*The HomeAdvisor rating for Stone Countertop Service companies in Thatcher, UT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Stone Countertop Service needs.

Last update on August 20, 2025

Reviewed in August 2025
He delivered an excellent performance on fixing my ice maker and while he was here he scheduled another appointment to fix another problem I had. He was very professional and very reasonably priced. I will recommend him to everyone I know!!!
Integrity Appliance Repair
Request a quote
Reviewed in May 2025
They were wonderful workers easy going did exactly what I needed them to do I will definitely be using Greenacres landscaping again.
Green Acres
Request a quote
Reviewed in September 2024
What a pleasure from start to finish with the owner. Very knowledgeable and thorough. I am very happy with his work. Thank you.
Bathtub Reglazing
Request a quote
Reviewed in July 2024
The work Ascent Restoration LLC did was top-notch. Not only did they consistently show up on time, but they also went above and beyond my expectations. I will definitely be using Ascent Restoration again for my future projects. The final project turned out great!
ASCENT RESTORATION LLC
Request a quote
Reviewed in March 2024
Quality work on driveway and sidewalk.
Dean's Concrete Construction LLC
Request a quote
Reviewed in December 2023
It was very nice not to have to climb all around the house roof top to get the gutters done!
JR Home Exterior
Request a quote
Reviewed in November 2023
Carl explained to me over the phone that my outlet under the sink is switched for the disposal but permanent for anything else. I just plugged in my RO pump to the lower plug and it powered up. Thanks for sharing your knowledge.
A.P.E.C. Electrical Services, Inc.
Request a quote
Reviewed in May 2023
Broken Horse pays attention to detail. They donâ t cut corners. They care about the quality of their work and how it will look not only now but in the future.
Broken horse construction
Request a quote
Reviewed in December 2022
Very professional! They took my tree down and cleaned everything up very nicely!
Holistic Tree Care
Request a quote
Reviewed in October 2021
Carey went above and beyond fixing my leaky chimney over the weekend before the rain started. He was a pleasure to work with and did an excellent job. The rain poured all night long and the house stayed dry. I’d highly recommend Wind River Masonry to anyone looking for fast, friendly,...
Wind River masonry
Request a quote

Top-Rated Stone countertop pros in Thatcher - Updated Nov 2026

Utah Flooring & Design

3.5(

1,073

)

Stone Slab Countertops - Install (Granite, Marble, Quartz, etc)

Serving Thatcher, UT and surrounding areas

Approved

In business since 1998

Free estimates

Emergency services offered

"Absolutely Perfect Job Well Done. This was a tile countertop project. JC who installed my project with Utah Flooring and Design was amazing and had the job done in 3 days time. I would highly recommend this contractor for anyone needing any type of flooring, or countertops."

+102

Response time6 hrs

51 neighbors recently requested a quote

Recommended by68%of homeowners

Request Quote

The Kitchen Doctors LLC

New to Angi

Stone Restoration & Polishing

Serving Thatcher, UT and surrounding areas

Approved

Emergency services offered

Warranties offered

Credit card accepted

TKD Builders (The Kitchen Doctors LLC) – Your trusted Salt Lake City remodeling experts with over 15 years of award-winning experience. Specializing in stunning kitchen and bathroom transformations, we handle everything from custom cabinetry and premium countertops (granite, quartzite, quartz) to full design, fabrication, and professional installation. Licensed, insured, and committed to quality craftsmanship, transparent communication, and exceeding expectations. Serving Salt Lake City and surrounding areas with free in-home design consultations and flexible financing. Elevate your home—contact us today for a no-obligation quote!

Request Quote

Elite Stone Works, LLC

5.0(

)

Stone Slab Countertops - Install (Granite, Marble, Quartz, etc)

Serving Thatcher, UT and surrounding areas

In business since 2000

Free estimates

Warranties offered

"The entire project was professionally conducted from start to finish. The countertop install team showed up on time each day and finished the job as stated. They did a great job installing our countertops without any damage to our house. I would highly recommend them to anyone who is looking to purchase and install new countertops."

+20

Recommended by80%of homeowners

Stone Slab Countertops - Install (Granite, Marble, Quartz, etc)

Serving Thatcher, UT and surrounding areas

In business since 2018

Free estimates

Credit card accepted

"Great work, very professional, looks wonderful, we love it."

Response time1 day

Recommended by100%of homeowners

Stone Slab Countertops - Install (Granite, Marble, Quartz, etc)Stone Slab Countertops - Repair (Granite, Marble, Quartz, etc)

Serving Thatcher, UT and surrounding areas

Free estimates

Credit card accepted

"Great. Finished in timeframe given. Made sure we were kept in the loop and making final decisions on layout. We couldn’t have been more pleased with the final remodel. 5-Stars ?"

+39

Recommended by100%of homeowners

Request Quote

Accurate Flooring Installations, LLC

New to Angi

Stone Slab Countertops - Repair (Granite, Marble, Quartz, etc)

Serving Thatcher, UT and surrounding areas

In business since 2008

Free estimates

Accurate Flooring Installations, LLC. is a locally owned and operated company serving the Woods Cross, UT area and surrounding communities. When you are looking to repair, refinish, or modify your existing solid surface countertop, we offer modern day technology with old world craftsmanship to help you achieve the desired look. Reasonable rates, friendly customer service, and quality workmanship. Call us now! \n

Request Quote

Victors Granite Counter-tops, LLC

New to Angi

Stone Slab Countertops - Install (Granite, Marble, Quartz, etc)

Serving Thatcher, UT and surrounding areas

In business since 2015

Free estimates

With over 10 years of experience in Countertops, Victor's Granite Counter-Tops LLC is your industry expert in Ogden. We pride ourselves on our extreme professionalism and attention to detail. Our customer satisfaction guarantee will assure you that we will not leave your property until you are completely satisfied with our work. As a family owned and operated business, you can trust that we will treat your home as we would treat our own. Give us a call today, we look forward to working with you!

Request Quote

Wayman Bro's Construction, LLC

4.4(

)

Stone Restoration & Polishing

Serving Thatcher, UT and surrounding areas

"Alma fit our big miscellaneous drywall job into their schedule, and his crew is skilled and efficient. The texture had to match and it looks great. We couldn't be more pleased."

+41

Recommended by91%of homeowners

Request Quote

Granite Works Inc

New to Angi

Stone Slab Countertops - Install (Granite, Marble, Quartz, etc)

Serving Thatcher, UT and surrounding areas

In business since 2006

Free estimates

Offers commercial services

Granite Works is a locally owned and operated company that values honesty and integrity in all aspects of our business. Our dedicated team of professionals have over 15 years of hands on experience to provide innovative ideas and suggestions tailored to your projects. Our services are customized to your individual needs, paying close attention to the details of each project that we are involved with. Please feel free to contact us today! \n \n \n

Request Quote

Rivermill Cabinetry & Woodworks

New to Angi

Stone Slab Countertops - Install (Granite, Marble, Quartz, etc)

Serving Thatcher, UT and surrounding areas

Free estimates

Small jobs welcome

Offers commercial services

We design and build custom cabinetry that’s as functional as it is beautiful. For over 20 years, builders and homeowners have trusted our team for precision, reliability, and clear communication from start to finish.

Request Quote

Showing 1-10 of 16

Stone Countertops FAQs, answered by experts

Your morning mug of coffee won’t instantly damage your quartz countertop, but it’s still wise to play it safe. While quartz can handle brief heat, repeated exposure can wear down its finish over time. Using a coaster adds a simple layer of protection and helps keep your surface looking fresh.

There are many benefits of granite countertops, but it’s not unusual for them to have seams—especially if you’re working with small slabs joined together. Seams are common on larger islands where the installer needs to use more than one granite slab to cover the surface. Luckily, because seams are normal in granite countertops, pros know how to hide them properly, so you’d never know they were there.

The angle at which you cut countertops depends on the material, your intended outcome, and the location of the cut. For example, rather than cutting a straight 90-degree angle for internal corners, cut edges at a 45-degree angle to give a clean, professional look. For outside edges, most homeowners want squared-off sides, so 90-degree angles can make the most sense there. Because you want to get angles exactly right to minimize seams and eliminate the need for patching, be sure to measure several times before cutting and use the right equipment to get sharp, accurate angles.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Installations can be done on drywall, plaster, brick, concrete, and tile, with specialized anchors or fasteners as needed.

The Thatcher, UT homeowners’ guide to stone countertop services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Deirdre Sullivan
•
Oct 27, 2026Oct 27, 2026
How Much Do Caesarstone Countertops Cost? [2026 Data]
Are you getting close to deciding on Caesarstone® countertops for your home? Discover all the details behind Caesarstone® countertop costs in this guide.
Deane Biermeier
•
Oct 28, 2026Oct 28, 2026
How Much Does a Silestone Countertop Cost? [2026 Data]
Silestone® has long been a favorite of homeowners who like the look of quartz. Budget for your Silestone® countertop’s cost with this helpful guide.
Mariel Loveland
•
Jul 31, 2026Jul 31, 2026
The Top 7 Types of Stone Countertops for Your Kitchen
From luxurious marble to trendy slate, this guide will show you the best types of stone countertops for your kitchen. Let’s dive in.
Lawrence Bonk
•
Jul 9, 2026Jul 9, 2026
Engineered vs. Natural Stone Countertops: Which Is Best for Your Kitchen?
Are you weighing engineered stone vs. natural stone countertops? Both offer many of the same benefits, but there are differences in price, durability, and appearance.
Deirdre Sullivan
•
Jul 8, 2026Jul 8, 2026
How to Prevent and Fix Stone Countertop Etching
Those dull, annoying marks on your countertop might not be stains. Discover what stone countertops etching is and what you can do about it.
Gemma Johnstone
•
Jul 9, 2026Jul 9, 2026
Butcher Block vs. Stone Countertops: Which Is Best for Your Dream Design?
This guide covers the differences between butcher block vs. stone countertops to help you decide which to use for your kitchen remodeling project.