Get matched with top gate repair pros in Corinne, UT

Automatic gates don’t use too much electricity, and you should see a minimal effect on your utility bill. In fact, certain gate systems are entirely self-sufficient and rely on solar panels attached to or near the gate to power the motor. While a gate is large and there is a powerful motor moving it, it’s not something that sees constant use throughout the day. For most automatic gates, expect to see a utility bill increase of only around $10 per month.

Double gates come with the same gaps as single gates, with hinges taking up a quarter of an inch of space. The difference is that double fence gates also have a center gap, which needs a little more clearance. Space the center gap at half an inch instead of the usual three-eighths of an inch for a single gate. 

In most cases, you will need a permit to install a new driveway or property gate. An exception might be if you are simply replacing an existing gate. Before issuing a permit, your local municipality may require a site plan or survey to verify property lines and prevent encroachment on a neighbor's property. Permits for a gate typically cost under $100. Be aware that corner properties may have additional restrictions on gate height or style. It's wise to confirm permit requirements with your local building department or your gate installation company, which can usually handle the entire permitting process for you.

This largely depends on the layout of your property and your preferred walking route to various entryways. Take your time figuring out the perfect spot for the gate to avoid difficulties later on. With all this said, the best place to put a gate is an area free from obstructions that offer the shortest route to your house.