Get matched with top contractors in Centerfield, UT

Q: Are ceiling joists load-bearing?

• <div><p>Yes, ceiling joists are typically load-bearing. However, their primary function is to support the weight of the ceiling and loads applied to it, like lighting fixtures and ceiling fans. They can also help support the roof, especially if they&rsquo;re part of truss systems. Remember, the load-bearing capacity of ceiling joists depends on the material, size, and space between them. </p></div>

Q: How long does it take to frame with metal studs?

• <div><p>Framing with metal studs can be significantly faster than using wooden studs, provided you have some experience working with the material. While you can use virtually instant pneumatic nailers with wood, metal requires installing screws. However, because metal is lighter, straighter, usually comes cut-to-length, and doesn't require sorting for the best pieces, you can save significant time using metal instead of wood. </p></div>

Q: Are walls on the top floor load-bearing?

• <div><p>Yes, walls on the top floor can be load-bearing if stacked on the floor&rsquo;s foundation.</p></div>

Q: How many board feet are in a 2x4?

• <div><p>There are approximately 5.33 board feet in a 2x4. You can use the board foot calculator in this article to easily find the answer. A 2x4 is 2 inches of thickness by 4 inches of width, so you need to find the length, with 8 feet being the most common. You&rsquo;d use the calculator here to multiply 2 times 4 times 8, and then divide by 12, arriving at a total of 5.33 board feet. </p></div>

Q: Why are studs 16 inches apart?

• <div><p>In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called &quot;on-center&quot; and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called &quot;advanced framing&quot;. This requires careful planning and adherence to local building codes to ensure structural integrity. </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your contractor service project in Centerfield, UT?

Select your specific project to find the pro for you.

Verified Reviews for Contractor Service pros in Centerfield, UT

*The Angi rating for Contractor Service companies in Centerfield, UT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Contractor Service needs.

*The HomeAdvisor rating for Contractor Service companies in Centerfield, UT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Contractor Service needs.

Last update on March 07, 2025

Reviewed in March 2025
Craig was on time for our estimate. Completely diagnosed our problems and his price was better than expected. While others had proposed short cut questionable approaches to our repairs, Craig only suggested top quality , code compliant repairs. On Schedule, he showed up completely prepared...
Freeze Electric LLC
Request a quote
Reviewed in March 2025
Witty tus excavation did an exceptional job removing approximately 1/2 mile of old cement ditch. They hauled off all of the old cement and then leveled and grated the area. I am very pleased with her professional worked and would definitely hire them again.
Witty Tuss Excavation & Garden, LLC
Request a quote
Reviewed in March 2025
Witty tus excavation did an exceptional job removing approximately 1/2 mile of old cement ditch. They hauled off all of the old cement and then leveled and grated the area. I am very pleased with her professional worked and would definitely hire them again.
Witty Tuss Excavation & Garden, LLC
Request a quote
Reviewed in November 2024
Vance was very efficient remodeling an old shower that needed extensive work. He handled the unexpected problems with ease, knowing just what to do to fix the problem. He was dependable, easy to work with and his work is top notch! He made an old unattractive bathroom brand new!
Leeway Handyman LLC
Request a quote
Reviewed in October 2024
I had Anthony power wash the exterior of my elderly parentsâ home along with their sidewalks. He was very polite and professional and my mom absolutely loved him. The job was done with attention to detail. I highly recommend Plugman Powerwashing.
Plug Man Power Washing
Request a quote
Reviewed in June 2024
I have a big yard that was a mesh with years of weeds. He listened to my needs and came right in and did the job cleaned it up and it looks great thank you Nathan.
Green Landscaping LLC
Request a quote
Reviewed in February 2023
This company has been amazing to work with. Matt and Seth were so attentive to all of my needs and were willing to do absolutely everything I asked them to. This was not, by any means, an easy remodel, and I am beyond thrilled about how it turned out. They certainly went above and beyond in...
Peaking Engineering and Construction, LLC
Request a quote
Reviewed in February 2023
Excellent worker. Fast and accurate. Almost too much of a perfectionist. He wants things done right. Very detailed oriented and very easy to work with. He built my whole garage from pouring the concrete floor and side walls to the framing and installing of the trusses. He shingled the roof and...
Scottys Custom Construction llc
Request a quote
Reviewed in September 2021
Lance gave bid yesterday and finished the job just 30 minutes ago. Was very willing to do a couple of extra items and was always cheerful. Highly recommend this company
Exterior Guys, LLC
Request a quote
Reviewed in August 2021
The contractor is knowledgeable in all types of HVAC and refrigeration big and small and including auto AC. He is also knowledgeable in all types of home appliance repair. He responded quickly and the work was completed efficiently and on time.
Affordable Refrigeration & HVAC LLC
Request a quote

Find Contractors in Centerfield

DML mechanical llc

5.0(

)

Serving Centerfield, UT and surrounding areas

Free estimates

Emergency services offered

Credit card accepted

"I got a fantastic job from Diego ( DML MECHANICAL LLC) , he was very professional, responsable and he always did the job as he promised, besides that he has the knowledge and good aptitude to performance his duties, i would recommend him anytime!!! Feel free to contact me if you need any other information!"

+75

Recommended by100%of homeowners

Serving Centerfield, UT and surrounding areas

In business since 2006

Credit card accepted

"I never contacted the provider or used this service in anyway. I have to
write this review so that the request to write this review stops
popping up.
The rating is bogus as it is required to be able to submit.
"

California Client Saves with HMD Designer Discounts

Recommended by54%of homeowners

Request Quote

Jill Seidner Interior Design

3.5(

)

Serving Centerfield, UT and surrounding areas

In business since 2006

Credit card accepted

"Once I sent her all the measurements, it took her a little while to get the options back to me. Overall, they're good designs. However, they're very simplistic and give general ideas for space planning. I was hoping to have a better idea for sizes of furniture for the space and some variations on staging.
Jill was very responsive when I did have a question. I'm not sure how helpful it is to have a virtual design done. If we lived in similar cities, I'd probably use her again for help with additional designs.
"

Recommended by55%of homeowners

Request Quote

BL Vincent Enterprises LLC

4.0(

)

Serving Centerfield, UT and surrounding areas

In business since 2023

Free estimates

Emergency services offered

"They are very professional and can do almost anything. Brandon really puts in the extra effort to do things the right way. Fit and finish is very nice 👌 I will recommend them to my friends."

+17

Response time3 hrs

Response rate96%

Serving Centerfield, UT and surrounding areas

In business since 2023

Free estimates

Emergency services offered

"Mr Bateman was professional and did a great job. Needed assistance with a kitchen remodel and he was knowledgeable and did what was asked without over charging."

Recommended by100%of homeowners

Serving Centerfield, UT and surrounding areas

In business since 2021

Free estimates

Emergency services offered

"He was fast, within budget, and did a great job installing my gutter."

Recommended by100%of homeowners

Request Quote

Independent Powur Solar Energy Consult.

5.0(

)

Serving Centerfield, UT and surrounding areas

In business since 2017

Free estimates

Emergency services offered

"Trevor was highly informative and guided me through the process. I HIGHLY recommend using him if you are th inking of solar....Great tax advantage."

ACT NOW BEFORE THE PROMOTION COMES TO AN END!

Side by Side Comparison of what the Black on Black looks like vs Black with white grid lines!

+25

Recommended by100%of homeowners

Serving Centerfield, UT and surrounding areas

Free estimates

"Went well. You got the job done and patched in good order. Helped me out of a tight spot."

Recommended by100%of homeowners

Request Quote

Ford Custom Carpentry

4.8(

)

Serving Centerfield, UT and surrounding areas

In business since 2021

Free estimates

Emergency services offered

"Eric did a great job in building my vision of a deck. He also finished all of my hardwood flooring,trim, and crown molding that I didnt have time to do. I will hire home again to finish a few of my other projects I have."

Recommended by100%of homeowners

Request Quote

Hampton Enterprise LLC

3.7(

)

Serving Centerfield, UT and surrounding areas

In business since 1989

Free estimates

Emergency services offered

"I only use James when I need some work done to my house. He responds fast, gets the work done quicker than just about anyone else I've ever used and seems very concerned with leaving his customers happy."

Recommended by60%of homeowners

Request Quote

Showing 1-10 of 18

Unfinished Carpentry questions, answered by experts

Yes, ceiling joists are typically load-bearing. However, their primary function is to support the weight of the ceiling and loads applied to it, like lighting fixtures and ceiling fans. They can also help support the roof, especially if they’re part of truss systems. Remember, the load-bearing capacity of ceiling joists depends on the material, size, and space between them.

Framing with metal studs can be significantly faster than using wooden studs, provided you have some experience working with the material. While you can use virtually instant pneumatic nailers with wood, metal requires installing screws. However, because metal is lighter, straighter, usually comes cut-to-length, and doesn't require sorting for the best pieces, you can save significant time using metal instead of wood.

Yes, walls on the top floor can be load-bearing if stacked on the floor’s foundation.

There are approximately 5.33 board feet in a 2x4. You can use the board foot calculator in this article to easily find the answer. A 2x4 is 2 inches of thickness by 4 inches of width, so you need to find the length, with 8 feet being the most common. You’d use the calculator here to multiply 2 times 4 times 8, and then divide by 12, arriving at a total of 5.33 board feet.

In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called "on-center" and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called "advanced framing". This requires careful planning and adherence to local building codes to ensure structural integrity.

The Centerfield, UT homeowners’ guide to contractor services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
May 30, 2026May 30, 2026
How Much Does Carpentry Framing Repair Cost? [2026 Data]
Get the latest carpentry framing repair cost estimates. Learn what impacts your price and how to budget for your framing repair project.
Kate Fann
•
May 30, 2026May 30, 2026
How Much Does It Cost to Install Shiplap? [2026 Data]
The cost to install shiplap siding or wall surfaces in your home depends on several factors, including the material type and the size of your project.
Dan Simms
•
May 30, 2026May 30, 2026
How Much Does It Cost to Install an Outlet in an Unfinished Basement? [2026 Data]
Need to run electricity to your basement? Learn about the cost to install an outlet in an unfinished basement and what factors affect your project cost.
Mizuki Hisaka
•
Apr 5, 2026Apr 5, 2026
Wood Putty vs. Wood Filler: Which One Is Right for Your Project?
A decision between wood putty vs. wood filler can be tough. Find out the differences between the two products in this guide.
C.E. Larusso
•
May 21, 2026May 21, 2026
8 Stylish Ways to Remodel Your Unfinished Basement
An unfinished basement is often the final frontier of home design. While the uses of other rooms are often preordained, the basement can be so many different things, from a playroom to a home office to a bar.
Matt Marandola
•
May 22, 2026May 22, 2026
How to Hire a Qualified Pro for House Framing
House framing is one of the first parts of building a home. To do this, you’ll want to hire a rough or unfinished carpenter. Using this guide, you’ll know what questions to ask and where to look for your house framing contractor.