Get matched with top wallpaper removers in Cedar Valley, UT

Wallpaper in bathrooms can last anywhere from one to 10 years, depending on what type was used, how well it was installed, and the measures in place to reduce moisture and humidity levels. Opting for a more durable variety and taking all the necessary protective measures will get you closer to that longer lifespan.

In most cases, it is not recommended to wallpaper over existing wallpaper, as the success depends on the type of paper already on the wall. While you might be able to cover non-coated wallpaper, you should never apply new wallpaper over a vinyl-coated one, which is more common. Doing so can lead to poor adhesion, resulting in bubbles, imperfections, and peeling. It can also trap moisture, potentially causing hazardous mold growth between the layers.

Even if the existing wallpaper is suitable, experts recommend applying only one new layer. Adding multiple layers (more than two total) can cause significant adhesion problems, leading to warping and bubbling. For the best results, the recommended approach is to remove the old wallpaper and all paste residue before hanging the new paper. If you are unsure about your wallpaper type, consider consulting a professional.

As long as the surface you’re putting the tile on is properly prepped, peel-and-stick backsplashes should stay on and last anywhere from 3 to 5 years. The best way to ensure the tile stays on is to sand down and clean the wall before applying your design.

Peel-and-stick wallpaper is designed to be removed without damaging walls, making it a good choice for renters or temporary design changes. However, damage to paint or drywall can occur under certain conditions. To prevent issues, the wall surface must be properly prepared before application—it should be clean, smooth, dry, and correctly primed or painted. Applying wallpaper to a freshly painted surface can cause the paint to peel off during removal. Additionally, removing the wallpaper too quickly or aggressively can also cause damage. For best results, always follow the manufacturer's instructions for both application and removal.