Get matched with top plaster repair specialists in Yantis, TX

You can plaster over regular drywall, but it's essential to prepare the surface properly. Before plastering, the drywall should be clean, free of dust, and any loose or peeling paint should be removed. Applying a primer specifically designed for plastering can improve adhesion. Some professionals recommend applying a base coat of plaster or joint compound to create a better surface for the plaster to adhere to. Proper preparation ensures a smooth and durable plaster finish over regular drywall.

Heat can help plaster dry faster, but it's very easy to get too much of a good thing. When exposed to high heat during the curing process, plaster can dry out too quickly, leading to cracks and affecting the material's integrity. The recommended drying temperature should be listed on the plaster's packaging. If possible, set the thermostat in the room to that temperature, but not any higher.

Although their applications are very similar, no drywall compound and spackle are not the same thing. Spackle is a bit thicker and is used to patch holes as it dries quickly and is easy to sand. Joint compound shrinks a bit more and can be more temperamental to spread. However, one benefit is that you can use joint compound as spackle (for small jobs), but you can’t use spackle as joint compound.  

This depends on how much plaster is applied and in how many layers, but a decent estimate is around 150 square feet. If you are applying only two coats on a small wall, there is a chance you may only need one or two gallons for the entire project. If you are plastering a large living room wall with high ceilings, using one of the more involved techniques–like Scagliola–that requires several coats, expect the project materials costs to add up quickly.