Get matched with top drain cleaners in Weimar, TX

No, you should avoid using liquid drain cleaners. These chemicals, often packed with sulfuric or hydrochloric acid, can wreak havoc on your pipes, causing erosion and potential leaks. They’re also dangerous to your health. If you’re dealing with a stubborn clog, manual removal or a professional plumber is your best bet. Chemical drain cleaners can often make things worse, especially if the clog stays put and the chemicals linger in your pipes.

There are several homemade solutions for clearing a clogged sink that don’t involve pouring harsh chemicals down your drain. Start by pouring hot (but not boiling) water down the drain. This can help dissolve and flush away grease and gunk. A splash of dish soap down the drain can also cut through fat and make it easier to clear the drain. For a more stubborn blockage, grab a plunger and give it a few firm pumps to dislodge the clog.

The most common cause of a clogged sump pump is natural debris buildup. As water enters the sump pit, it can carry small pieces of debris that build up over time, or the debris can get caught in the filter. If you forget to cover the pit after cleaning the sump pump and pit, debris can also collect in the pit. Corrosion on the metal discharge pipe can also clog the pump. Additionally, if your pipes freeze, it can prevent water from draining properly and cause a clog.

A saturated leach field can result from various underlying issues, so it's best to call a professional septic company to diagnose and treat the problem. Depending on the cause of the saturation, potential fixes include pumping out a full septic tank, adding more bacteria to the tank, or regrading the soil to fix low spots. It may also be necessary to reroute rainwater and runoff away from the leach field using gutters, downspouts, and extenders. Once the primary issue is resolved, planting specific types of vegetation over the area can help absorb excess water. In more severe cases, you might need to install a larger septic tank or replace the leach field entirely.