"I called Marvin on 4/10/2018 and he came out the next day to take a look at the job to give me an estimate. I explained that I wanted the railing to be of Spanish motif and have a gate such that we could walk from the porch to the back yard. I additionally told him that I wanted heavy gauge or solid steel posts such that the railing would not move if someone leaned on it. He had a catalog with him that had every handrail and baluster under the sun. I was able to find exactly what I wanted. He went out to his truck and in about 10 minutes had an estimate to do the job. I gave him a 50% deposit and he then left. He explained to me that he had to order all the materials since what I had selected was all special order. I additionally requested that the railings be powder coated gloss black. At that time he indicated that powder coating would add an additional 10-14 days to the fabrication process, I was OK with that. After about 2 weeks I checked in with him to check on the progress, he told me that all the railing parts had arrived and he was in the fabrication process at that time. The total length of the railings was over 40' so this was a lot of balusters to weld. About 2 weeks later he called me to let me know the railings were complete and we scheduled a day for installation. On the day of installation he and a helper arrived on time and it took about 5-6 hours to install. The job turned out better than I could have ever imagined, everyone that sees our porch has remarked what a beautiful railing. I could not have been more satisfied. Prior to calling MG fabrication, I read each and every review he had on Angie's List. During the installation I was chatting with Marvin about some of the reviews posted on Angie's List that mention he was slow in responding and I told him after reading them in my opinion most of them had unrealistic expectations. You have to remember that Marvin does all the fabrication and installation himself, so you have a guy that has been welding all his life working on your job. His company has no salespersons, or other employees that run up his overhead. He additionally told me that he located his shop on the west side of San Antonio where his monthly leasing expenses were very cheap. I liked everything about this guy and his company, his estimate was less than I expected and I gave him the job without getting any more estimates, he has a great business model, essentially no overhead, and that model was reflected in the estimate I received, and the workmanship is impeccable. Once my wife and I can decide on how we want the stairs to look we are going to meet with Marvin and have him fabricate our stairs. Thanks Marvin"

"Mr. Galan showed up, quoted us a reasonable price, and did the work. He not only did the welds but primed and painted them. I would recommend him to anyone,"

"It went very well. The work was performed as expected. The contractor provided excellent communication."

"Good people, but their equipment let them down, but they overcame that by renting the equipment they could finish the job with. their welding is very good."

"Stop looking for a fence contractor and hire these professionals now!!!! Don’t even worry about getting any other quotes… just hire these guys and sit back and relax. We just had our fence completely replaced and these guys are AMAZING. After speaking with Rey, we learned that everyone who does the work is employed by the company and not contracted workers, and it shows. They take pride in their work. Three gentlemen showed up on time and got right to work. They cleaned up all of mess and took all of the trash and old wood with them. It took them about 7 hours to complete the fence. The fence is perfect, they made sure it was straight and spaced evenly. The gate is amazing! It smoothly glides open and closed. Our neighbors also had their fence done and through all of the mass communication between us, our neighbors, and Rey, Rey was so helpful and patient. We had some miscommunication with our neighbors and Rey was extremely honest in resolving the issue. We will always use and highly recommend this company. For reference, the total fence we had replaced was 117 linear feet with one 4-foot gate. We had Postmaster metal posts and 6" wide Western Red Cedar pickets in the shadowbox style (pickets on both sides - so that costs more than just pickets on one side) and it cost about $4,200. Keep in mind this is during COVID19 in which there is a cedar shortage and wood prices have tripled. Amazing work at a great price!!!"

I’m 26, been welding for 8+ years, there’s no job to big or too small. If you need small things, precise things or things repaired. I also work on cars

We are a locally owned and operated company that values honesty and integrity and treats your home as if it were our own. We offer a variety of General Contractor services that are customizable to each individual project. You will find us to be competitively priced, paying close attention to the details of each and every project that we are involved with. We look forward to building lasting relationships and guarantee your satisfaction!\n

"I needed a new gate and partial fence. The job was done professionally and even earlier than expected. The price was very reasonable, too"

"Great job! Worked hard even in the horrible hot weather. Highly recommend ."

Woman, veteran and fully insured welder with 7years experience. I’ve welded a variety of things from pipe fencing, TPosts to trailers. I like to make/fabricate things thinking outside the box using what materials you or I have on hand.