Get matched with top sauna installation pros in Sanger, TX

"He came out and replaced the ceiling fan in the laundry room, he installed a new timer for my patio lights and stitched up an electrical plug in my master bath. I paid him a little extra for the extra time."

"Jeff arrived on time and provided the bid in a timely manner.  He let me know when they would come out and he kept to his schedule.
The installer also arrived on time.  The pump and diving board installation went great, however, not so much with the spa switch.  After a while, he let me know that it wasn't working, but he wasn't sure if it was the wiring or a board in our controller.  
The next day, another installer determined that it was our board, so unfortunately we paid for a new spa-side switch ($450) that did nothing.  Jeff and I discussed the situation, but I never understood why they didn't test the wiring/board BEFORE installing the new switch.
Jeff did work with me on other bids (controller repair/replacement) and would credit me the spa-side switch if we had them do the additional work.  However, the least expensive option ($1500) is too much for us at this time.
I gave a B for price (since I paid for something I can't use) and professionalism (since I think the installer should've have done better testing before installing the switch).  However, Jeff was very professional.
"

"I contact Tubs and Tops for a quote and sent them some pictures of my 1974 tub that had been rusting--I got an immediate response with a description of the process. They were able to come by the same week that I called. 
The tech showed up a little early and called when he arrived. He was very friendly and got straight to work. It took about 3 hours from start to finish. He was very careful to tape up the bathroom to make sure none of our surfaces/fixtures were damaged during the process. The tech was very knowledgeable and walked me through the process and even gave me some pointers on how to maintain our new tub. Once he was completed, he cleaned up the area and it looks like we have a brand new tub! 
I'm pleased with the work they did and it beats having to get a whole new tub, have it disposed, installation, etc etc.

"

"I had a different company out to diagnose a problem with the
rain sensor on my irrigation system.
That company?s technician found the sensor bypass switch on
the control panel on.
He told me that was the reason the sensor was not working
and apparently stopped his diagnosis there.
That next weekend I found that the sensor was indeed not
working and that was probably the reason the bypass switch was on.
I decided to try to replace the sensor myself and bought a
new sensor at Home Depot. (The Home Depot sensor was only $40.00 and the other
company was going to charge well over $200.00 to replace it.)
While I was attempting to install the new sensor I
accidentally touched the power terminals with the sensor wires, which caused a
spark.
The control panel went blank.
I initially had thought that the problem might have been a
circuit breaker or GFCI.
After checking the breaker box and all the GFCIs I could
find I was pretty sure it was the transformer in the control panel. (The
voltage in the panel is 24 volts and since it was wired directly into the 110
volt breaker box I knew there must be some sort of transformer in the control
panel.)
The control panel is mounted outside and is wired directly
into the circuit breaker box. I knew I had no business attempting to replace
the control panel.
I called H20 Sprinkler Systems on Monday.
They told me they could be out on Wednesday morning or
possibly Tuesday afternoon.
I told them we had family coming Tuesday afternoon so
Wednesday morning would actually be better.
The technician arrived a few minutes before his scheduled
arrival time of 8:00 AM.
He quickly told me that the controller had been ?fried? (my
term.)
He was able to install a new controller.
As he was about to connect the rain sensor (which I had just
bought at Home Depot) he warned me that those models are sometimes problematic.
Since I thought I would be able to return the sensor to Home
Depot, I had him go ahead and install a better sensor.
His sensor was $189.00 so it was quite a bit more than the
Home Depot model, but almost $100.00 less than the model offered by the other
company.
To be honest, I always wonder when someone suggests an
upgrade if they are totally honest or just pushing for more sales.
The installation took less than an hour and the total bill
was $478.00 ($200.00 for controller, $179.00 for sensor, and $89.00 for one
hour of labor and service call.)
"

Chimera Property Restoration specializes in helping homeowners and businesses recover from water damage (flooding), mold, storms, smoke and fire disasters. We Have Certified Specialists Available 24/7 offering quick response, industry knowledge and quality clean-up service. We handle small floods/fires to the multi-level commercial large losses with expertise.

First impressions and building relationships with customers are the most important success factors to my business. We pride ourselves in quality workmanship with new pool installations as well as pool maintenance. New to Angie's List and really looking forward to meeting you!

"Reached Carl right away, pleasant and up-front. Told him my issue, said he could do it, but it would be the week after. Only issue is he forgot about us. I called again he told me that Tuesday or Wednesday. He contacted me Tuesday, said man there in 30. Man was punctual and professional. Fixed something my builder installed poorly. Looks great now. His price was more reasonable than others talked to."

Sparkling Pool Services Co.

"Installer was prompt and professional."

Fiberglass Bulge Repair, Pool Remodeling, Equipment Repair And Replacement, Pool Crack Repair, Gelcoat Premier Fiberglass Pool Resurfacing takes pride in offering quality products and customer service our warranty is second to none. we don't use sub-contractors so you can rest assure that when we start the project we will be there everyday until the job is done.And complete in a timely manner. we guarantee our product to outlast any other. Premier Fiberglass Pool Resurfacing employees are skilled and knowledgable. whats sets us apart is our 20+ years of experince and our dedication to offering . Quality, performance, and reliability equate to a lower cost system in the long run.