Get matched with top painters in Rio Bravo, TX

When applying the first coat of touch-up paint, it is best to use a paint roller. A roller allows you to get a thin layer of paint to the area to avoid an unsightly blend with the old coat of paint. However, if you need to touch up the area a second time after the first coat has dried, a small brush will work best to avoid applying too much paint.

Yes, a mist coat can be too thick. If you don’t dilute the mist coat enough and you apply a thick coat to the wall, the plaster won’t be able to evenly absorb the coat. This can cause the later coats of paint to not adhere to the mist coat or plaster, leaving behind flaking, peeling, or bubbling paint. Even if it doesn’t flake or peel right away, a thick primary layer of mist coat can also cause the final paint job to look uneven.

If you want your paint to have a smooth finish, the technique you use is very important. Keep your brush at a 90-degree angle while applying the paint and feather as you go. Between coats, sand the wall lightly using a very high grit sand sponge of at least 220 grit.

In all cases, it’s more affordable to DIY paint than hire a professional painter, as you’ll save on labor costs, which makes up the large majority of your total when you hire a pro. However, you get what you pay for. Professionals have the equipment and years of experience to tackle a job much more efficiently than most homeowners, and they typically provide better results. It’s often worth the expense to save time and secure a more professional appearance for your paint job.