Get matched with top pavers and hardscaping pros in Palmview, TX

Overall, a paver driveway is considered the easiest to maintain because homeowners are able to do driveway repair one piece at a time without impacting the rest of the driveway. Unlike paved options, paver driveways contain individual stones that aren't physically connected. By comparison, you may need to reseal or redo a full asphalt driveway if just one portion sustains a significant crack.

Deciding between concrete, stone, or brick pavers comes down to your budget and the ease of installation. Concrete is the least expensive material, followed by brick and then natural stone. Concrete pavers are also the easiest to install, but bricks are relatively easy as well. Stone pavers require more time and labor because their natural shapes make them harder to fit together. Professional stoneworkers, however, are able to shape them as needed.

In most cases, you don’t need a permit to repave your driveway, although some exceptions exist. If you’re widening your driveway and plan on widening the apron as well, you’ll usually need a permit from the Department of Transportation in your area. This permit costs between $50 and $300 in most cases. Most municipalities will also require a certified and insured contractor do the work relating to the apron and curb cut. You can contact your building department or ask your paving company if you need a permit. Your driveway professional will usually pull the permit for you.

Standard paver sizes that measure 2 3/8 inches are appropriate for placing over concrete. However, always make sure you are not making the area too thick for daily use. A large step between your lawn and the patio can be a tripping hazard, and you need to be able to open and close all doors that swing over the top of the installation.