Get matched with top stone countertop pros in Onalaska, TX

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Yes, you can generally put hot pans directly on a granite countertop without worrying about cracking, as it is a durable, heat-resistant stone that can withstand high temperatures. However, it is still highly recommended to use a trivet or hot pad as a precaution. Prolonged or repeated exposure to high heat can potentially cause discoloration or damage the countertop's sealant, making it more susceptible to staining. Additionally, the heat from a pan can transfer to the granite, creating a burn hazard for anyone who touches the surface shortly after.

Small kitchens benefit from simple, blunt countertop edges, as complicated edges can create visual clutter and be more of a hazard if you bump into them. Eased edges are a top pick for small kitchens because they are simple, do not jut out, and do not take up additional space. Bullnose edge countertops are also popular because of their rounded design; they are elegantly simple and will not be sharp when you bump against them. Single-beveled edges are also a good choice, as they look a little more upscale but still have rounded edges for safety and simplicity.

The best tool for cutting countertops depends on the type of countertop material. For some softer materials, like laminate (Formica) and butcher block, you can use a hand saw, but most experts recommend power saws like circular saws, since these make the job go faster and easier and give more even results. However, power saws and circular saws are dangerous if used incorrectly, and they can be so powerful that they damage or chip laminate, stone, and other types of countertops. For this reason, you should take safety precautions and use best practices to prevent damage.