Get matched with top pavers and hardscaping pros in Newton, TX

Quality pavers and correct installation handle temperature variations. Proper maintenance is crucial in severe climates to prevent issues like heaving.

Yes, you should lightly wet the sand with a hose before laying the pavers on top. This activates the bonding agents in the sand, ensuring that your pavers don’t shift around during the installation process. However, you should make sure that the sand is not soaked; overwatering can cause the sand and pavers to not set properly.

Pavers are a type of permeable hardscape that can be used for driveways, patios, walkways, and other landscaping features. Unlike poured concrete or asphalt, pavers typically have a layer of gravel underneath to prevent water runoff from damaging your property—though you can also lay pavers on grass. Because pavers are installed piece by piece, you can customize a one-of-a-kind hardscape that best suits your aesthetics, boosting your curb appeal along the way.

You can walk on newly sealed pavers as long as they’ve had enough time to dry and cure—typically after 24 hours for patios and walkways. Even so, don’t rush it. Humidity, temperature, and the type of sealant you use can stretch that window up to 72 hours. Rushing it can leave footprints or even damage the finish, especially if the surface hasn’t fully hardened. For driveways, wait at least three full days before parking or driving over them. Always check your sealant label for the most accurate timeline, since not all products cure the same way.