Get matched with top pre-made cabinet pros in Mason, TX

If you're looking for ways to save money on custom cabinets, there are a few ways to cut costs without sacrificing beauty. For starters, comparing door styles to choose the most cost-effective option is a great way to save money on the overall project.

In addition, choosing a common wood species versus an exotic one will lower the price. Woods like oak and hickory are often more affordable wood choices, and the same goes for knobs, pulls, and other finishes where picking a commonly available style can reduce costs.

It’s much less expensive to build your own garage shelves, and you’ll still get stable, long-lasting, and sharp-looking shelves. Garage storage systems cost between $615 and $2,635, with the national average of about $1,455. Building DIY garage shelves typically costs less than $500, and the quality of a DIY garage shelving unit will almost always be higher than what you could buy premade for the equivalent price.

It’s best to stick with lightweight cabinets, such as medium-density fiberboard, if you don’t have a wall stud to secure them to. Unless you’re attaching the cabinet to a flat board attached to wall studs, it’s best not to risk it with heavy cabinetry or contents. Solid wood cabinets and heavy dishware should be avoided if you cannot secure the cabinet to a wall stud. Either way, always check the weight on your wall anchors and be sure not to exceed it.

The 1/3 rule is a design guideline used by interior designers and cabinet installers to select appropriately sized pulls for cabinets and drawers. The rule suggests that for a balanced and cohesive look, a cabinet pull should be approximately one-third the height of the cabinet door or one-third the width of the drawer face. This guideline helps create a symmetrical appearance because the human eye tends to follow the length of the pull across the cabinet face.

While the 1/3 rule is a helpful starting point, it is not the only option. If a measurement falls between available pull sizes, it's generally best to size up. For an ultra-contemporary aesthetic, you can also opt for full-width pulls that span the entire drawer.