"Sandblasting is expensive but the results are amazing. My paint splattered patio looked like new - like the concrete had just dried the day before. My driveway with 15 years of ground in dirt also looked completely clean. Owner Ron and his son arrived on time and worked quickly. My neighbors came over while the two men were working and wanted to get that kind of service and home improvement for themselves. If I ever sell my house, I'd do this again - it adds a lot of curb appeal."
"Great! They arrived at the time they promised. They were careful around my shrubs. The brick and siding of the house looked great and I was shocked at the difference having the driveway pressure washed made. I have asked them to contact me every 6 months to have it done again."
"The owner Josh was very knowledgeable and explained step by step what was going to happen. When it was completely done we was more than satisfied we enjoyed his kindness and thoughtfulness. Will be using again and further more permanently."
Applied Cryogenic Solutions specializes in mold testing, remediation and restoration services for commercial and residential clients. We have over 100 years of combined experience serving thousands of satisfied customers, let us add you to our extensive list of satisfied customers. We are the best in the business because we truly care about the health and value of each client and their property. We are quality and detail oriented providing cutting edge technology with proven methods of success. Call us today for scheduling and testing information and your toxic mold issues go away.
Sandblasting Services questions, answered by experts
Sanding and pressure washing serve different purposes in deck maintenance, so one is not necessarily better than the other. Pressure washing is ideal for annual cleaning to remove dirt, grime, mold, and mildew. Sanding is a deeper restoration method used to smooth rough surfaces, remove an old finish, and prepare the wood for a new coat of stain or paint. The ideal process for refinishing a deck is to first clean it (with a power washer), then sand it, and finally apply the new stain or finish. While cleaning should be done annually, sanding and staining are typically needed only every one to three years.
Because these two systems have different applications, there is no definitive answer to which is better. When working with sturdy materials, sandblasting is cheaper and faster, but more delicate projects require soda blasting. Before choosing either option, consider your specific needs, particularly your ultimate goal (cleaning, removing rust, prepping for painting, etc.), the material, and your budget.
Regular sealing and repainting help maintain the restored surface’s durability.
Costs depend on paint type, surface condition, labor, and required prep work for repainting.
Soda-blasting systems are slightly more expensive than sandblasting systems. To soda blast, you’ll need to spend a few hundred dollars for a blast hose and nozzle, a compressed air supply, a blast generator, a moisture decontamination system, and sodium bicarbonate media, a recurring cost because the powder is not reusable. To start with sandblasting, you will need to spend upwards of $30 for a blast pot, a blast gun, an air compressor, and sandblasting media, many of which are recyclable—further reducing the cost. The total cost for either will depend on the size of the system.
The Marfa, TX homeowners’ guide to sandblasting services
From average costs to expert advice, get all the answers you need to get your job done.
Sandblasting is a powerful method to remove paint, primer, and other coatings from hard surfaces. Learn the cost to rent a sandblaster and the factors involved.
The cost to sandblast your home’s exterior or another surface on your property depends on the method and the materials you use. Learn more with this guide.
