Get matched with top furniture refinishers in Jasper, TX

If the scratch is large enough that it compromises the integrity of the wood, a wood filler probably won’t be enough to fix the problem. In that case, you might need to sand and refinish the entire floor or replace a board. If you do use a filler, use one that’s appropriate for the scratch. Water-based wood fillers work for small gaps or gouges, while epoxy has added strength to fill larger scratches and gaps.

Yes, you can tackle small rooms yourself if you're handy and have a flat, clean subfloor to work with. But seams must be sealed properly, or the barrier will fail. Any gaps will let moisture sneak through and defeat the purpose of installing this more expensive type of carpet padding. For larger rooms or areas, professional installation is usually worth the extra cost.

Wood stain remover should remove most, if not all, of that wood stain on its own. While sanding can be a great final step, especially if you’re planning to paint or restrain the wood, it isn’t always required. Following the first three steps of this process can leave you with beautiful results. 

Sometimes you will need a stronger cleaning solution to thoroughly clean furniture before painting. It’s best to start with a mild solution to avoid damaging the surface, especially if it is an antique piece. If you need to use a stronger mixture, try a commercial cleaner or mineral spirits. Before applying any solution, do a test patch on an inconspicuous area so you don’t risk damaging the finish.