Get matched with top sonic cleaning pros in Houston, TX

Yes, you can, but you’ll need to acquire the right pressure washer tips and cleaning solutions for the job. In particular, you’ll need tips that are capable of lowering the pressure from a max of 3,500 PSI to between 150 and 300 PSI. As for the cleaning solution, look for options that are clearly marked for soft washing rather than pressure washing. 

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.

Yes, moss can be dangerous for your roof if left in place to grow without treatment. The moss soaks up and holds moisture. Having a constantly damp roof could lead to problems with rot for the parts of the roof that consist of wood. Additionally, a patch of thick moss may draw insects and birds, which could damage the roof. Thick moss could block the roof’s drainage system. Water then may back up after a rainstorm and cause further damage that could eventually lead to roof repair expenses or the cost of roof replacement.

Generally, snow removal from a roof should occur once over six inches of snow accumulates, especially if you notice that ice dams have formed. Without ice dams, you can let the snow accumulation hit 12 inches before removing it. However, the amount of snow that is too much for your roof also depends on the sturdiness of your roof and the compactness of the snow. If your roof needs maintenance or has structural issues, it’s best not to let the snow accumulate too much for fear of collapsing.