Get matched with top sonic cleaning pros in Henderson, TX

Yes, you can, but you’ll need to acquire the right pressure washer tips and cleaning solutions for the job. In particular, you’ll need tips that are capable of lowering the pressure from a max of 3,500 PSI to between 150 and 300 PSI. As for the cleaning solution, look for options that are clearly marked for soft washing rather than pressure washing. 

Inspect for debris, clean drains, and regularly check for punctures or cracks to maintain performance.

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.

Chemical herbicides will kill moss permanently. The same goes with bleach water. However, moss can start growing again once a new layer of dirt and debris is caught in your sand in paver joints. Therefore, the problem is not about killing moss permanently, but ensuring effective prevention of moss regrowth.