Get matched with top stone and gravel pros in Hale Center, TX

Cobblestone is not a type of rock but a term for a mosaic or rock laid down as a surface. It used to be made from the closest available stone but now can be made from nearly any hard rock, as machining has made shaping the stone much easier and cheaper.

The cost of masonry work varies widely depending on the type of masonry along with common cost factors like size, complexity, location, and season. Most exterior masonry work done in freezing temperatures tends to cost more because of the preparation and protection involved to keep the masonry from freezing before the mortar cures properly. The average price ranges per project or square foot for different types of masonry include:

• Brick wall (fence, garden wall, etc.): $10–$45 per square foot

• Natural stone wall: $40–$110 per square foot

• Manufactured stone veneer: $20–$40 per square foot

• Brick home exterior: $10–$30 per square foot

• Brick siding: $3–$10 per square foot

• Stone siding: $35–$50 per square foot

• Brick step replacement: $20–$30 per square foot

• Brick wall repair: $20–$40 per square foot

• Chimney repairs: $160–$750 per project

• Tuckpointing: $5–$25 per square foot

Yes, brick can breathe through limewash. Limewash is a breathable coating made from natural lime and water, allowing moisture to pass through while providing a protective layer. Unlike synthetic paints or sealants, which can trap moisture within the brick and lead to issues like mold, limewash allows the brick to maintain its natural breathability. This characteristic makes limewash an ideal choice for historic structures where preserving the integrity of the brick is essential.

Brick spalling—which refers to the crumbly, flaky, or pitted appearance that can develop over time—is caused by a few different conditions. These include:

• Climates with constant freeze-thaw cycles

• Use of non-breathable sealants

• High-pressure water cleaning

• Improper installation

While you can’t do anything about the weather, you can preserve your bricks by cleaning them with soapy water and a good old-fashioned scrubbing. Pressure washers may be satisfying to use, but they can eventually wear away the surface of your bricks. If you don’t have advanced-level DIY skills in masonry, you can hire a reputable masonry contractor in your area for your project.