Get matched with top earthquake retrofitting specialists in Fannett, TX

Hearing or feeling vibrations in your house can be unsettling, but there are a few possible causes for a vibrating noise in your wall or floor. Light bulbs and fixtures, circuit breakers, loose pipes, or faulty wiring could all cause vibrations. If you’re not sure what’s causing the vibrations, you can call a contractor to assess your home and narrow down the cause.

First, you can expect the project to be loud. If you have pets, you might want to take them to a friend's house during the day so they are not disturbed by any of the loud noises. In addition, you’ll need to provide the retrofit team access to areas of the house that will need to be worked on, meaning you’ll need to relocate personal items, clear clutter, and make pathways for the crew. Once the project is complete, a local building inspector will conduct a final inspection to ensure that the retrofitting is up to code.

Generally, the retrofitting process can take two to four weeks. Your contractor will let you know if staying in your home for the entire project is feasible. However, most people are able to remain at home. If your home is undergoing earthquake rehab, it's more likely that you'll need to leave until work is complete. Your earthquake insurance may cover boarding costs if your home is deemed unsafe.

Even if you invested in the cost of a gas shut-off valve for your oven and other appliances, it’s a good idea to add a seismic shut-off valve as an extra safety measure. 

Gas shut-off valves for appliances are manual, meaning someone has to cut off the flow of gas. This leaves room for error, as you might not be home or might be too distracted to think about gas lines during an earthquake. An earthquake valve is automatic and will protect your home from gas-related disasters in the event of an earthquake.