Top-rated drywall insulation pros.

Best drywall insulation pros near Ennis, TX

Enter your zip and get matched with up to 5 pros

Need a pro for your drywall insulation project in Ennis, TX?

Select your specific project to find the pro for you.

TRUSTED BY ENNIS, TX HOMEOWNERS

  • Average homeowner rating star icon4.5
    Average homeowner rating
  • Verified reviews icon102
    Verified drywall insulation services reviews

Top-Rated Drywall insulation pros in Ennis - Updated Nov 2026

Avatar for Milo Insulation of East Texas
Milo Insulation of East Texas
5.0(
80
)
Blown-In Insulation - Install or Upgrade

Serving Ennis, TX and surrounding areas

Approved

In business since 2000

Free estimates

Warranties offered

"They really worked hard to find the specific type of insulation I wanted for my walls in my garage conversion. It was Rockwool R15 Comfort Batt Insulation. It makes the room feel cozy and it helps to dampen sound!!! My walls were 2 X 4 inch walls. They were able to do the work, within 7 days, from first coming to my home and giving a bid!!! That is amazing!!! They listened to what I wanted and installed it properly!!! I would recommend them to anyone needing insulation!!!"
MILEX Transformation
MILEX Transformation
MILEX Transformation
MILEX Transformation
MILEX Transformation

+2

Response time2 days
8 neighbors recently requested a quote
Recommended by91%of homeowners
Avatar for Hawx Insulation-Dallas
Hawx Insulation-Dallas
4.1(
361
)
Blown-In Insulation - Install or Upgrade

Serving Ennis, TX and surrounding areas

Approved

In business since 2013

Free estimates

Credit card accepted

At Hawx Pest Control, our company is based on the belief that our customers' needs are of the utmost importance. Our team is committed to meeting those needs. Hawx Premium Pest Control will treat your pests, mosquitos, and more- then keep them away for good. If pests come back between treatments so will we, at no additional cost to you. We welcome the opportunity to earn your trust and deliver you the best service. No job is too big or too small for our experienced team. Call today for a quote. \n

2 neighbors recently requested a quote
Recommended by75%of homeowners
Avatar for 53 Air & Power, LLC
53 Air & Power, LLC
4.1(
366
)
Blown-In Insulation - Install or Upgrade

Serving Ennis, TX and surrounding areas

Approved

In business since 2017

Free estimates

Credit card accepted

"They came on time, did the job, cleaned up, and left. They knew we had an attic door in the doctor's exam room so they entered thru the garage attic door but when they blew the insulation in, they didn't cover or protect the other attic door. Insulation fell in thru the cracks all over the technician who was working with the doctor. Since they knew the door was there I wish they had kept insulation from flying in. Otherwise I think they did a great job. It certainly made a difference in the temperature of the building on hot days."
Gas logs kit
Crown repair
Ventless gas logs
Response time3 hrs
Response rate97%
65 neighbors recently requested a quote
Avatar for Clean Air Pro Services
Clean Air Pro Services
4.6(
53
)
Blown-In Insulation - Install or Upgrade

Serving Ennis, TX and surrounding areas

Approved

In business since 2010

Free estimates

Emergency services offered

"Ben at clean air pro services was prompt, professional, and personable. He showed me a before and after of my ducts, then showed me what he retrieved from my ducts. You won’t believe the amount of dust and crud that we breathe in on a daily basis. We also tried them out for our dryer vent cleaning. Again another professional and quality job. I totally recommend this company."
swamp went into the flue line down to the fire box
Bacteria Found in the plenum box
Attic space before
Cap was not properly covered or sealed.
Another angle of the plenum box with the Bacteria

+29

Response time11 hrs
Response rate100%
68 neighbors recently requested a quote
Avatar for Midlo Insulation
Midlo Insulation
5.0(
3
)
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving Ennis, TX and surrounding areas

Approved

In business since 2022

Free estimates

Small jobs welcome

"Communication was exceptional. There was a scheduling conflict and it was resolved quickly to our satisfaction, They arrived on time, completed the job professionally and cleaned up before they left. We highly recommend Midlo Insulation."
Response time1 day
Response rate93%
Recommended by100%of homeowners
Avatar for Energy W Solutions, Inc.
Energy W Solutions, Inc.
5.0(
4
)
Injection Insulation - Install

Serving Ennis, TX and surrounding areas

Approved

In business since 2014

Small jobs welcome

Credit card accepted

Energy W Solutions, Inc., is committed to excellence in every aspect of our business. We uphold a standard of integrity, bound by fairness, honesty, and personal responsibility. Our distinction, is the quality of service we bring to our customers. Accurate knowledge of our trade, combined with ability, is what makes us true professionals. The goal of our business is to add value for clients, on both sides of a transaction.

Response time1 day
1 neighbors recently requested a quote
Recommended by100%of homeowners
Avatar for S.R. Insulation
S.R. Insulation
4.9(
44
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Ennis, TX and surrounding areas

In business since 2016

Free estimates

Emergency services offered

"My 1950, 860 ft house had 20+ yr old dusty, pink insulation, that was even worse after the city revamped utility vaults & pushed rats into the neighborhood. I chose S.R Insulation to vacuum out, caulk open voids, and re-blow insulation. The owner set up an appointment quickly. On the day of service, he did call 15 minutes late to advise of an issue. The 3 person team arrived within an hour, set up the vacuum and bags, then removed insulation; original, wood-shingle slips; and ducting left by A/C techs. They worked between 3 to 4 hours and said they would return next business day. The two part installation, gave me an idea - I asked for an extension, so I could repair ceiling sheet rock while the attic was void. The owner agreed. He did not require partial payment. Three weeks later, I rescheduled. The install was even quicker, filling up to the stud height in white, blown insulation. He leaves behind a cardboard measuring stick to show you. The difference inside the house was immediate. I will not provide calculations, as I added front load washer/dryer to the electric usage at this same time. Later, I found my stove top vent fan blocked. I was able to pull out material from the duct, and the fan worked. Therefore I did not call the owner about this. I paid less than $1500, and thought it fair. I would use S.R. Insulation again and recommend them."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+110

Recommended by100%of homeowners
Avatar for Milo Insulation of Texas - Denton
Milo Insulation of Texas - Denton
5.0(
79
)
Blown-In Insulation - Install or Upgrade

Serving Ennis, TX and surrounding areas

In business since 2000

Free estimates

Warranties offered

"My wife and I were very pleased with the team that came out to install the MILO Insulation at our home. We found them to be very professional and courteous. They worked quickly and quietly to install the MILEX insulation and cleaned up after themselves. Overall it was a fine job. We would highly recommend MILO Insulation of Texas â Denton."
New MILEX Insulation
New MILEX Insulation
New MILEX Insulation
Retrofit Install of MILEX
Retrofit Install of MILEX

+13

Response time1 day
Response rate98%
Recommended by92%of homeowners
...
Showing 1-10 of 114
Drywall Insulation FAQs, answered by experts

Whether to repair or replace water-damaged plaster depends on the scale of the damage. For small, limited areas, you can often perform a repair yourself. If you choose to paint over small patches, ensure the surface is completely dry and apply a coat of antifungal primer first to prevent mold growth. However, simply painting or plastering over the damage is only a temporary solution that doesn't address the core problem. For more extensive or long-term damage, the plaster may be compromised, and there is a risk of mold. In these cases, it is recommended to remove the damaged section of plasterboard and replace it. You may consider hiring a professional for the repair, and it's worth noting that water damage is often covered by home insurance.

Both plaster and drywall are durable wall finishes, but they differ significantly in installation, cost, performance, and aesthetics.

Installation & Cost: Drywall installation is faster and more affordable, typically costing $1.50 to $3 per square foot. It uses premade sheets, making it a more accessible DIY project. Plastering is a labor-intensive craft that requires specialized skills, pushing costs to $2 to $10 per square foot. It involves applying a wet paste over a lath framework.

Durability & Performance: Plaster is generally more durable, longer-lasting, and provides superior soundproofing. It is also a better insulator, which can help reduce energy costs. Drywall is easier to remove for future renovations.

Aesthetics: Drywall provides a smooth, uniform surface ready for paint or texture. Plaster offers a high-end, naturally textured look that can hide imperfections and is often preferred for achieving a classic or historic aesthetic.

Which is better? The choice depends on your priorities. Drywall is ideal for those prioritizing a lower upfront cost, faster installation, and DIY potential. Plaster is the better option for a higher-end project where durability, soundproofing, and a unique, premium finish are more important than the initial cost.

Certain drywall textures, like sand and sometimes popcorn, can be smoothed by applying skim coats, sanding the walls, or chipping away the texture. However, it’s worth considering removing the texture and starting with a blank canvas. Smoothing textured walls requires a lot of sandpaper and elbow grease and can take longer than just outright removing the texture.

Yes, taping inside corners is a critical step in the drywall installation process.  Properly taping inside corners is essential for achieving a professional look, and an installation that resists cracking and maintains its integrity over time. Taping the corners involves the application of a joint compound along the seam where two drywall pieces meet. This process provides reinforcement, conceals the seam, and prevents future gaps or cracks from developing.

Whether you need drywall anchors depends on your specific project, particularly where you are hanging an item. Drywall anchors are not necessary if you can drive a screw directly into a wooden stud behind the wall, as the stud provides sufficient support. However, since studs are not present everywhere in a wall, you will need to use drywall anchors if you are hanging an object in a location without a stud. For very lightweight items, picture hanging strips can also be a suitable alternative.

The Ennis, TX homeowners’ guide to drywall insulation services

From average costs to expert advice, get all the answers you need to get your job done.