Get matched with top patio pros in Eldorado, TX

About 6 inches between the edges of each stone in the sequence is common. Rather than sticking to 6 inches, some people measure the length of the entire path and adjust the space between stepping stones a couple of inches wider or narrower than 6 inches to make sure the entire path fits the length perfectly without having to cut a paver at either end. Other people prefer a design with a 24-inch distance from the center of one stone to the center of the next stone, which matches the stride of an average-sized person.

If you don’t put gravel under concrete, the concrete can crack, sink, bow, or crumble. Even the concrete forming process will not go as smoothly if you are working directly on the soil or bare bedrock. The lack of a proper gravel layer can also lead to drainage issues below your slab, leading to water issues throughout your lawn and around your foundation.

The cost to pour a driveway apron depends on the material and size. Concrete costs $3 to $10 per square foot, asphalt ranges from $2 to $5, and pavers are $5 to $15 per square foot. Additional expenses, like excavation, base material, and labor, can increase the total cost. For example, a standard 12x15-foot concrete apron could cost between $540 and $1,800, depending on local rates and additional work required. Always consult a local driveway paving contractor to get an accurate estimate tailored to your project.

The size of your driveway apron will vary based on your town's building codes. On average, they range between 12 and 24 feet wide and eight to 15 feet long. One end of the apron usually matches the width of the driveway—10 to 12 feet wide for a single-car driveway—while the street end flares out to allow cars to turn in and out.