Get matched with top door pros in Donna, TX

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

Longer screws can make a door more secure, but this isn’t a foolproof method for security. Replacing the short screws in your door’s strike plate with screws that are 3 inches long will make it much more difficult for an intruder to force entry by kicking down the door, but it won’t do anything to stop them from picking the lock. 

Standard door sizes aren’t one-size-fits-all, but there are common go-to dimensions. For exterior doors—like your front door—36 inches wide by 80 inches tall is typical, though you’ll see 30- or 32-inch widths too, especially in older homes. Interior doors vary more. Bedrooms and bathrooms often use 30- to 32-inch widths, and closet doors can be anything from slim singles to wide bi-folds. Height is usually 80 inches across the board; however, always measure your actual opening. “Standard” only works if it matches what’s already in place.

If you don’t know which door sweep to buy, look into getting a strip or bristle sweep. They’re easy to find at the store, work well for most doors, and the simple installation is DIYable. Before buying one, measure your door width and make sure the one you want is long enough. Most door sweeps are 36 inches long, and you can cut them down to size with a hacksaw.