Get matched with top plaster repair specialists in Blossom, TX

Although their applications are very similar, no drywall compound and spackle are not the same thing. Spackle is a bit thicker and is used to patch holes as it dries quickly and is easy to sand. Joint compound shrinks a bit more and can be more temperamental to spread. However, one benefit is that you can use joint compound as spackle (for small jobs), but you can’t use spackle as joint compound.  

You can drywall over plaster, but there are some things to consider. First, installing drywall over plaster will increase the wall’s thickness. This could create challenges for window and door frames that no longer fit the wall’s thickness. You may also have to adjust power outlets so they are accessible. When done right, drywall can create a smooth, flat appearance, but it’s best when handled by professionals.

The short answer is yes, a sagging plaster ceiling is dangerous. Sagging plaster on a wall is something you should fix immediately, but it isn’t a major concern. If the same type of sagging occurs on a ceiling, however, you could be in danger of your ceiling falling in large chunks. When plaster sags, it loses its strength and ability to hold itself up. The bonds that hold it together are strong, though, so if a sagging area falls, it will take large pieces down with it.

If your home was built before the 1940s and was not remodeled in the past 50 or so years, you probably have plaster walls. Aside from assuming, there are some practical ways to tell if you have plaster walls, including the following: If you knock on the wall and it feels solid, not hollow, if you can’t insert a thumbtack easily, if there are cracks that look like spiderwebs, or if your home has curved, arched, or swirled walls, doorways, or window openings.

If you have an unfinished basement or attic, you could examine the backs of any finished walls to check, too.