Get matched with top glaziers in Anthony, TX

Using caulk is one of the simplest and most recommended methods to finish glass tile edges. It creates an elegant seam between the glass tile and the adjacent area, along with a waterproof seal. With this method, you want to use a caulk color that matches the grout and, along with the grout, compliments the tile. Make sure the caulk line is smooth and even. Alternatively, you can use a bullnose or tile trimming to edge, however, that will also require caulk to seal.

There are a few reasons your mirrors might have smears on them after cleaning, but the two most likely are remaining cleaning product and minerals from hard water. If you used a commercial glass cleaner, consider spraying down the mirror with a 1-to-1 ratio of white vinegar and water after cleaning and then wiping it dry with a cotton cloth. If you suspect hard water is the issue, use a cotton ball soaked in rubbing alcohol to spot-clean the streaks, and then let the mirror air-dry.

The best tool for DIYers to use to cut glass is a glass cutter, which can either use a straight blade or a sharp cutting wheel to score glass. Once you score the lines you want to cut, elevate the scored line over a pivot point and apply light, even pressure to both sides. Make sure you wear protective gloves and glasses to stay safe during the process.

While finding your mirror cracked can be spooky, there are actually many logical and common reasons why this happens. First, the mirror may have been mounted unevenly in the first place. Over time, poor mounting leads to stress points that will eventually cause a mirror to crack. Other common causes of a mirror spontaneously cracking include dramatic temperature shifts, strong thunder or a loud crash somewhere in the distance, exposure to heat and sunlight, and an uneven wall in your home. It's also possible that your mirror had a manufacturing defect or microscopic cracks that occurred during glass cutting or handling that eventually caused it to shatter.