Get matched with top garage pros in Aledo, TX

During a garage door tune-up, a pro will check and adjust your door’s components, looking for any damage and loose cables, springs, or rollers. The pro will also lubricate moving parts, like the hinges and rollers, and likely tighten some screws and bolts. They’ll also adjust the door opener’s tension and alignment to make sure it’s level. Finally, they’ll wash the door to ensure it’s clean, and test the auto-reverse mechanism to make sure it’s working as it should.

The best paint for a garage door depends on the door's material, the desired finish, and durability requirements.

Paint Type

The type of paint you need often depends on the material of your garage door:

• Aluminum Doors: Typically require exterior acrylic paint.

• Vinyl and Wood Doors: Exterior latex paint is usually recommended.

• Steel Doors: Professionals often use latex or oil-based paint.

You can choose between acrylic, oil-based, and latex paints. Acrylic paint offers excellent UV and weather resistance and dries quickly, but may require multiple coats. Oil-based paints are very durable and may only need one coat, but they dry slowly and emit more VOCs. Latex paint is available in a wide range of colors and is forgiving to apply, but it can crack over time and may require a primer for even coverage. For an eco-friendly option, consider acrylic latex paint.

Paint Finish

You have a wide variety of finishes to choose from, including semi-gloss, gloss, satin, eggshell, and matte. The choice is largely based on personal preference, but many people opt for a semi-gloss or gloss finish. These finishes dry to a hard, durable surface that stands up well to humidity and regular wear and tear.

Regardless of the type or finish, it's crucial to use a quality exterior paint that can withstand the elements. Using a primer before painting will ensure better adhesion and a more even, long-lasting result.

We recommend plywood and solid wood. Particleboard and MDF (medium-density fiberboard) are often too weak to hold significant loads, and could sag or deform under pressure. Plywood or solid wood are meant to last, and can handle the weight of several large items. If you want to spend a little more for a moisture-resistant material, you can consider using steel.

Most cabinetry made for a garage will have special coatings and finishes built to withstand extreme heat and cold, moisture, pest damage, rusting, and dry rot. However, many homeowners have put their old kitchen cabinets in the garage, added a couple of fresh coats of paint, and use them for a while without too much wear and tear.