Top-rated wood stove inspectors.

Get matched with top wood stove inspectors in Winchester, TN

Enter your ZIP and get matched with up to 5 pros

Need a pro for your wood stove inspection project in Winchester, TN?

Select your specific project to find the pro for you.

TRUSTED BY WINCHESTER, TN HOMEOWNERS

  • Average homeowner rating star icon4.3
    Average homeowner rating
  • Verified reviews icon75
    Verified wood stove inspection services reviews

Find Wood stove inspectors in Winchester

Avatar for Frame Heating and Cooling

Frame Heating and Cooling

5.00(
2
)
Approved Pro

Frame Heating and Cooling

5.00(
2
)
Approved Pro
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers
6 years of experience

We take great pride in our experience, expertise, quality and customer service that we provide to meet the consumers needs. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety and quality, regardless of how large or small the job.

"Jordan did an excellent job replacing the blower motor in our furnace which was damaged in the recent storm. He ordered the part and installed it the next day. He also cleaned and checked the entire system. Their maintenance program is well worth the money."

Bob S on March 2024

We take great pride in our experience, expertise, quality and customer service that we provide to meet the consumers needs. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety and quality, regardless of how large or small the job.

"Jordan did an excellent job replacing the blower motor in our furnace which was damaged in the recent storm. He ordered the part and installed it the next day. He also cleaned and checked the entire system. Their maintenance program is well worth the money."

Bob S on March 2024


Brown's Plumbing and Electric

New on AngiNew on Angi
Approved Pro

Brown's Plumbing and Electric

New on AngiNew on Angi
Approved Pro
21 years of experience
Free onsite estimate

Browns Plumbing and Electric is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty and responsibility in all of our jobs. We are a locally owned and operated business with more than 15 years of experience serving FAYETTEVILLE, TN and surrounding areas. There is no job too big, or too small for our team. Call today and let us put our experience to work for you!

Browns Plumbing and Electric is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty and responsibility in all of our jobs. We are a locally owned and operated business with more than 15 years of experience serving FAYETTEVILLE, TN and surrounding areas. There is no job too big, or too small for our team. Call today and let us put our experience to work for you!


Welch Mechanical Solutions

5.00(
2
)
Approved Pro

Welch Mechanical Solutions

5.00(
2
)
Approved Pro
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers
10 years of experience

Welch Mechanical Solutions proudly serves it's customers with pride, integrity and attention to the details that matter most to you. This is one of the many things that sets us apart from the rest. We are locally owned and operated. Give us a call today!

"I would definitely recommend him. He is a hard worker! He is on time and does a good job!"

Matt on May 2021

Welch Mechanical Solutions proudly serves it's customers with pride, integrity and attention to the details that matter most to you. This is one of the many things that sets us apart from the rest. We are locally owned and operated. Give us a call today!

"I would definitely recommend him. He is a hard worker! He is on time and does a good job!"

Matt on May 2021


"This was the second system we purchased. The first was a replacement heat pump for our upstairs system. This one was an air conditioner and gas pack heating for the main residence. We purchased this through their rebate offer via Costco. We really wanted this to be a no problems sale. We paid in cash (check) the day before it was installed. The basic unit seems to work correctly and reliably so far. The inside has been comfortable since it was installed. That’s the good side of the story. The unit upstairs was installed with a programmable thermostat - Which I did not particularly want. That programmable thermostat is awkward to use - And I am a degreed electronic engineer! I eventually replaced it with a simple non-programmable thermostat. When I got the quote on the recent main unit replacement, I insisted on keeping my simple to use Honeywell Electronic heating and cooling thermostat. We are retired and one of us is usually home so there is zero reason to use a programmable thermostat and frankly the Lennox programmable one is a misery to use. When the installers arrived I placed the installation manual for the existing Honeywell thermostat on the thermostat itself - Impossible to miss! The main unit was installed correctly and seems to work well. But the installer had difficulty hooking up the Honeywell thermostat due to wiring problems eventually found under the house in the thermostat wiring. It was a warm day on installation day and the heating settings were only briefly tested. Then the AC settings were tested and the installer was very quickly out the door. A week or so later it got cool and I switched to heating. In heat mode the circulation fan would not run unless the heat was actually heating despite the thermostat being set to fan “ON”. I am an electronic engineer and I suspected there was an error in the hookup of the thermostat. Turns out I was correct - The installer had set the internal thermostat switch to “heat pump” instead of AC with gas heating he had installed. Furthermore he had hooked up one thermostat wire to the wrong terminal. He has to go out of his way to make these mistakes instead of leaving the thermostat wiring and internal switch setting as it had been. I corrected these two errors and then the system ran correctly. Anyone can make a mistake, but it takes something “special” to be so sloppy in testing the installation not to notice it wasn’t acting correctly! Well I thought the only problem I had with Annette Hale Indoor Comfort Air was the sloppy installer. Just this morning the sales person called me to ask if we had paid for the unit from several weeks ago! The same sales person who picked up the check the day before - Which had cleared the bank some time ago. I may not be have been very polite with this person - It seems their accounting people are just as sloppy as their installer. Eventually I was called back and he apologized that they had been paid, they just somehow credited it wrong. I would never again use this installer. They screwed up part of the installation and then may have tried to collect twice for the same work! Sloppy, very sloppy! The Lennox equipment itself except for the miserable programmable Lennox thermostat works well and seems of good quality."

Charles W on May 2021

Annette Hale's Indoor Comfort Systems. We offer quality service at an affordable price. Contact us today about an estimate!

"This was the second system we purchased. The first was a replacement heat pump for our upstairs system. This one was an air conditioner and gas pack heating for the main residence. We purchased this through their rebate offer via Costco. We really wanted this to be a no problems sale. We paid in cash (check) the day before it was installed. The basic unit seems to work correctly and reliably so far. The inside has been comfortable since it was installed. That’s the good side of the story. The unit upstairs was installed with a programmable thermostat - Which I did not particularly want. That programmable thermostat is awkward to use - And I am a degreed electronic engineer! I eventually replaced it with a simple non-programmable thermostat. When I got the quote on the recent main unit replacement, I insisted on keeping my simple to use Honeywell Electronic heating and cooling thermostat. We are retired and one of us is usually home so there is zero reason to use a programmable thermostat and frankly the Lennox programmable one is a misery to use. When the installers arrived I placed the installation manual for the existing Honeywell thermostat on the thermostat itself - Impossible to miss! The main unit was installed correctly and seems to work well. But the installer had difficulty hooking up the Honeywell thermostat due to wiring problems eventually found under the house in the thermostat wiring. It was a warm day on installation day and the heating settings were only briefly tested. Then the AC settings were tested and the installer was very quickly out the door. A week or so later it got cool and I switched to heating. In heat mode the circulation fan would not run unless the heat was actually heating despite the thermostat being set to fan “ON”. I am an electronic engineer and I suspected there was an error in the hookup of the thermostat. Turns out I was correct - The installer had set the internal thermostat switch to “heat pump” instead of AC with gas heating he had installed. Furthermore he had hooked up one thermostat wire to the wrong terminal. He has to go out of his way to make these mistakes instead of leaving the thermostat wiring and internal switch setting as it had been. I corrected these two errors and then the system ran correctly. Anyone can make a mistake, but it takes something “special” to be so sloppy in testing the installation not to notice it wasn’t acting correctly! Well I thought the only problem I had with Annette Hale Indoor Comfort Air was the sloppy installer. Just this morning the sales person called me to ask if we had paid for the unit from several weeks ago! The same sales person who picked up the check the day before - Which had cleared the bank some time ago. I may not be have been very polite with this person - It seems their accounting people are just as sloppy as their installer. Eventually I was called back and he apologized that they had been paid, they just somehow credited it wrong. I would never again use this installer. They screwed up part of the installation and then may have tried to collect twice for the same work! Sloppy, very sloppy! The Lennox equipment itself except for the miserable programmable Lennox thermostat works well and seems of good quality."

Charles W on May 2021


Avatar for Neli Virtual Appliance Repair

Neli Virtual Appliance Repair

4.30(
577
)
Approved Pro

Neli Virtual Appliance Repair

4.30(
577
)
Approved Pro
Customers say: Super punctual
31279 local quotes requested
9 years of experience

NEW! Appliance Consultation – Just $35 Get expert advice before you spend on repairs or replacements. A Neli technician will evaluate your issue and help you decide if your appliance can be fixed—or if it’s time for a new one. Virtual Appliance Diagnosis and Repair - Just $45 Service Description: Diagnose or repair your appliance virtually—no need for anyone to enter your home. Neli’s certified technicians guide you step-by-step via secure video chat. How It Works: Book online at nelihome.com or call 833-876-0900 Connect with a tech through our video platform Diagnose or fix the issue in real time Get expert advice and confidence in your next steps What’s Included: Real-time video guidance from a certified technician Diagnosis of the issue OR full repair (when possible) Step-by-step guidance using your smartphone or tablet Safe, contact-free service - no one in your home Flexible scheduling—appointments available daily Perfect For: Appliance fixes HVAC troubleshooting DIY-savvy homeowners Saving time and money on service calls

"Super helpful"

Michele H on November 2025

NEW! Appliance Consultation – Just $35 Get expert advice before you spend on repairs or replacements. A Neli technician will evaluate your issue and help you decide if your appliance can be fixed—or if it’s time for a new one. Virtual Appliance Diagnosis and Repair - Just $45 Service Description: Diagnose or repair your appliance virtually—no need for anyone to enter your home. Neli’s certified technicians guide you step-by-step via secure video chat. How It Works: Book online at nelihome.com or call 833-876-0900 Connect with a tech through our video platform Diagnose or fix the issue in real time Get expert advice and confidence in your next steps What’s Included: Real-time video guidance from a certified technician Diagnosis of the issue OR full repair (when possible) Step-by-step guidance using your smartphone or tablet Safe, contact-free service - no one in your home Flexible scheduling—appointments available daily Perfect For: Appliance fixes HVAC troubleshooting DIY-savvy homeowners Saving time and money on service calls

"Super helpful"

Michele H on November 2025


Avatar for Frame Heating and Cooling

Frame Heating and Cooling

No reviews yet

Frame Heating and Cooling

No reviews yet
6 years of experience

Frame Heating and Cooling is a trusted HVAC contractor serving Kelso, TN, and the surrounding areas. Specializing in a wide range of services, including system installation, repairs, duct cleaning, and more, we offer free estimates and 0% financing options to our valued customers. Our team is experienced in handling residential and commercial projects, ensuring top-notch HVAC solutions every time. Contact us for reliable service and expert care for all your heating and cooling needs.

Frame Heating and Cooling is a trusted HVAC contractor serving Kelso, TN, and the surrounding areas. Specializing in a wide range of services, including system installation, repairs, duct cleaning, and more, we offer free estimates and 0% financing options to our valued customers. Our team is experienced in handling residential and commercial projects, ensuring top-notch HVAC solutions every time. Contact us for reliable service and expert care for all your heating and cooling needs.



Painting business locally owned and operated we feel invested in our clients and constantly strive for customer satisfaction. Call or message us to schedule an estimate today!



Nashville Construction Consultants

No reviews yet

Nashville Construction Consultants

No reviews yet

New Construction? Remodeling? Commercial Build? Design? Regardless of your construction need we have you covered. At no cost to you we will facilitate everything from the design to move in and everything in between. The best part is the contractor selected will pay our fees, so we 100% are working to protect you at all times and it does not cost you a dime.

New Construction? Remodeling? Commercial Build? Design? Regardless of your construction need we have you covered. At no cost to you we will facilitate everything from the design to move in and everything in between. The best part is the contractor selected will pay our fees, so we 100% are working to protect you at all times and it does not cost you a dime.

...
Showing 1-10 of 155
Wood Stove Inspection questions, answered by experts

Your chimney comes with dampers, which are similar to air vents. Dampers are metal plates that allow hot air and smoke to flow from the fireplace up your chimney and out of your home. When you close the damper, it prevents cool air from getting into your home. This is why you’ll want to check to make sure your damper is open before starting your fireplace and you want to ensure it’s closed after the fire goes out. You can open and close them via an external knob, pull chain, or lever. 

The National Fire Protection Association (NFPA) says that chimneys and their associated elements like fireplaces, vents, or stoves should be cleaned at least once a year before the start of seasonal use. According to the Chimney Safety Institute of America, a chimney should be cleaned when there is 1/8 inch of soot buildup. If there’s more than that, creosote—a flammable byproduct of burning wood—can form and increase the risk of a chimney fire.

There are fire codes for a fireplace mantel made of wood or other combustible material. The mantel must be mounted at least six inches away from the fireplace opening on all sides with a non-combustible material—like stone or brick—installed between the mantel and fireplace. Building codes and regulations will vary based on your location, so before beginning the project, research the requirements in your area.

Home insurance prices depend on where you live and the individual insurance company's policies. Some insurers charge a flat fee for fireplaces or wood-burning stoves, which is often a few hundred dollars per year. Other insurers base this fee on a percentage of your annual premium. You may want to check your current or prospective policy before beginning this project.

You can let a fire burn out in a fireplace as long as you or someone else will stick around to monitor it until it goes completely out. This may take several hours. To prepare, stop adding fuel to the fire well before you’re ready to call it a night. If you’re using the fireplace for warmth, you’ll want to cover up in some blankets as the flame dies down.

The Winchester, TN homeowners’ guide to wood stove inspection services

From average costs to expert advice, get all the answers you need to get your job done.