Top-rated welders.

Best welders near Powell, TN

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Powell, TN?

Select your specific project to find the pro for you.

Top-Rated Welders in Powell - Updated Nov 2026

Avatar for HUNTER'S WELDING REPAIR LLC
HUNTER'S WELDING REPAIR LLC
4.9(
4
)
Metal Stairs and Railings - Repair

Serving Powell, TN and surrounding areas

In business since 2020

Free estimates

Credit card accepted

"Hunters welding reached out to me within the hour of completing the application on Angiâ s list. They were at my marina within 72 hours going into a holiday weekend. He sent before and after pictures. I could not be happier with the end result. They treat like family!!"
Response time1 day
Recommended by100%of homeowners
...
Showing 1-10 of 54
Welding FAQs, answered by experts

Yes, but you’ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around ¾ inch thick, so it’s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.

Sawing your hot tub into more manageable chunks so it can be lifted easily into a truck takes several hours. Generally, 2.5 hours for smaller hot tubs and around 4 hours for larger ones with the help of one to two people. If money isn't a concern and you want to skip the physical labor, you can hire a pro to get the job done.

Some welding projects, such as repairing pipes or fences, require travel, whereas others, like furniture repair, do not necessarily require the welder to come to you. Travel and overhead factor into the overall cost of your welding project. Some of the most common welding projects include:

  • Metal furniture repair: $35–$100

  • Pipe repair: $200–$1,000

  • Small gates: $550–$750

  • Fencing: $1,200–$1,800

  • Fabricated sheet metal welding: $750–$2,500

Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective. 

Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation. 

Yes, you can cut plexiglass by hand using a sharp knife or blade (utility knife, box cutter, glass cutter, etc.).

The Powell, TN homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.