Get matched with top locksmiths in Pleasant Shade, TN

Yes, as long as it’s thick enough for the deadbolt. Most interior hollow core doors are at least 1 1/2-inches thick, which is usually the minimum requirement for a deadbolt. You’ll want to find the lock block first before installing. Also, most hollow doors require additional reinforcement for locks, such as a reinforcement plate or plywood block.

Lock picking is a relatively subtle method of unauthorized access, making it hard to detect. But there are telltale signs to look for. First, look for scratches or tool marks around the keyhole or the lock's surface. Also, check for loose or misaligned components, like a wonky strike plate, which could indicate tampering. Consulting a locksmith or security professional for an assessment can provide valuable insights, too. Investing in high-quality locks and considering additional security measures, like security cameras, can help deter potential intruders and enhance your overall safety.

Lock bumping is a technique locksmiths use to quickly and quietly open a pin tumbler lock, typically found in most types of deadbolts. It involves inserting a specially crafted key, or bump key, into the lock and tapping or "bumping" it with a mallet or similar tool. The force applied causes the lock's pins to jump momentarily, allowing the lock to be turned and opened. Unfortunately, thieves also use this technique to break into homes. Luckily, products like a deadbolt strap will fortify your lock.

When the temps drop, sometimes you need to thaw a lock to regain access. Options include warming the key with warm water, applying a de-icing spray, or using a hair dryer on low heat. Avoid using boiling water to prevent damage. To prevent future freezing, consider installing a cover or shield over the lock to keep water and ice out. Remember to be patient and gentle during thawing to avoid damaging the lock or key. If all else fails, consult a professional locksmith.