Top-rated sandblasting pros.

Get matched with top sandblasting pros in Allons, TN

Enter your zip and get matched with up to 5 pros

Need a pro for your sandblasting service project in Allons, TN?

Select your specific project to find the pro for you.

TRUSTED BY ALLONS, TN HOMEOWNERS

  • Average homeowner rating star icon4.7
    Average homeowner rating
  • Verified reviews icon10
    Verified sandblasting services reviews

Find Sandblasting pros in Allons

Ronnie's Pressure Washing
4.3(
3
)
Exterior Surfaces - SandblastingExterior Surfaces - Sandblasting - For Business

Serving Allons, TN and surrounding areas

"Ronnie was very thorough looking at the chimneys and analyzing our needs to give us an accurate quote. He thoroughly talked through the quotes and allowed me to ask many questions. When he came to do the job, he brought a helper (Big John). The two guys completed the job in a few hours, stacked the excess bricks nicely, and cleaned up after themselves. When doing the chimney sweeping, Ronnie laid out large cloth tarps to catch any falling ash/dust/debris and used a highly sealed vacuum to clean up inside our house when he was done. He even attached fans to the top of the chimneys to draw a lot of the ash/dust up out of the chimney instead of letting it fall into our living room. I was dreading having our chimneys cleaned expecting it to be a huge dirty mess. Instead, Ronnie and John worked quickly and kept things nice and clean.
As an added bonus, both men nicely talked to my four year old son who wanted to know EVERYTHING that they were doing."
Recommended by100%of homeowners
Sandblasting Services questions, answered by experts

Sandblasting refers to the process of cleaning a surface using compressed air and aggregate. Soda blasting is the gentlest type of this method, but it differs from sandblasting that uses mineral or other aggregate, since sodium bicarbonate breaks apart more easily than other forms of blast media and, therefore, cannot be reused.

Sandblasting removes old paint, rust, and grime efficiently, providing a clean surface for refinishing.

Sandblasting is useful when you need to strip material off a hard surface. Common reasons to sandblast are to remove paint, rust, or get a surface ready for a new material. You aren’t limited to surfaces like walls either—you can sandblast rusted tools, bicycle frames, cement, bricks, and many others. If what you’re sandblasting is still structurally sound, sandblasting can be a fast and inexpensive way to revive the original material. 

Soda-blasting systems are slightly more expensive than sandblasting systems. To soda blast, you’ll need to spend a few hundred dollars for a blast hose and nozzle, a compressed air supply, a blast generator, a moisture decontamination system, and sodium bicarbonate media, a recurring cost because the powder is not reusable. To start with sandblasting, you will need to spend upwards of $30 for a blast pot, a blast gun, an air compressor, and sandblasting media, many of which are recyclable—further reducing the cost. The total cost for either will depend on the size of the system.

Yes, many professionals use dustless or water-based blasting methods for reduced environmental impact.

The Allons, TN homeowners’ guide to sandblasting services

From average costs to expert advice, get all the answers you need to get your job done.