Get matched with top pressure washers in Woonsocket, SD

A good PSI for a pressure washer will depend on the job you're doing. Pressure washer PSI ratings range from 1,300 to 4,200 PSI. Lower PSI is suitable for cleaning dirt and debris off of softer materials. Use a low PSI when pressure washing vinyl siding , wood, or stucco. A heavy-duty job like cleaning graffiti off of concrete or brick will require at least 2,000 PSI.

No. In spite of its identical chemical makeup, sodium bicarbonate manufactured for blasting purposes has a particular type and size of particles that differs from grocery store baking soda. In addition, this method would not be cost effective because you would need several boxes of baking soda to equal one blast-sized bag of medium.

It usually takes about two to four hours to pressure wash a 2,000-square-foot home. The exact time depends on how much dirt there is, the type of siding, and whether you’re doing it yourself or hiring a professional pressure washing service. A DIY job can take an average of six to eight hours, but you should plan for it to take an entire day. A pro can get the job done quicker.

Though bleach is a great way to kill mold and mildew around the house, you should never, under any circumstances, use bleach in a power washer. Bleach is a potent chemical that will destroy the pressure washer from the inside out. If you’re worried about killing mold and mildew, you should instead hire a pro who will use a safe but effective cleaning agent when pressure washing your home.