Best marble and granite pros near Wanblee, SD

You should always seal cut countertops to prevent damage and to keep them looking their best. The right way to seal countertops depends on the type of material. For laminate and wood, apply epoxy or other specialty sealers by pouring it onto the countertop and letting it flow across the whole surface to the edges, guiding it with a paint stick or putty knife. You will need to move quickly so that it does not dry or harden before you are done. For stone countertops, use a sealant specially manufactured for your type of stone and apply it according to manufacturer directions. 

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

To remove cloudiness from marble, use equal parts baking soda and water to form a paste. Apply it to the surface, allow it to sit for at least two hours, then wipe with a microfiber cloth. Another option is adding a couple of dish soap drops to warm water and wiping the surface after you’ve applied it to the surface. You may also consider using a liquid stone cleaner.

There are three main downsides to quartzite: the cost, the porosity, and the weight. As a natural stone, there’s a level of scarcity that can drive up the price of certain types of quartzite. Even more common varieties are less affordable than synthetic materials like laminate and other natural stones like granite. 

You’ll also have to reseal your quartzite countertop annually to combat the natural porosity and reinforce your cabinets to account for the added weight.