Get matched with top holiday decorators in Spearfish, SD

The cost for professional holiday light installation averages around $430, with a typical range of $220 to $675. However, prices can be as low as $100 for simple projector setups or exceed $1,200 for extensive displays. The total cost depends on factors like the display's complexity, your home's size, labor rates in your area, and the type of lights used. For example, installation on a small, one-story home may cost $250 to $600, while a multi-story home over 4,000 square feet could cost $500 to $1,800. Costs can also be broken down by location (e.g., high roofs at $3.50–$6 per linear foot) or by the type of light strand, with prices ranging from $4 for basic incandescent strands to over $60 for color-changing LED strands.

Yes, a holiday lighting installation can be a DIY project. While it is possible for homeowners to do it themselves, it's crucial to ensure all safety precautions are taken. This includes using the proper tools, following electrical safety guidelines, and carefully planning the layout. For large or high displays, professional installation is often recommended to ensure safety and a more polished appearance.

To get in the festive mood, you might turn to hanging holiday lights yourself. In many circumstances, DIY Christmas light installation can be cost-effective, not to mention fun. However, it’s best to consider any limitations to this task and how that might affect your overall project, like tall roofs. Consider hiring a Christmas light installer to place lights or decorations in hard-to-reach areas like roof peaks to avoid the risk of injury.

It’s not a good idea to mix LED and incandescent Christmas lights if you can avoid it. LEDs and incandescents can have significantly different electrical current needs. This difference can lead to a higher risk of problems and failure for both light strands. When possible, switch all your lights over to one kind or the other for the best results. Do not connect the different types of light strings to each other, and avoid linking them to the same circuit.