Get matched with top pressure washers in Plankinton, SD

Yes, you can use a pressure washer to help with deck paint removal. One of the benefits of pressure washing is its speed. However, a pressure washer is best used with a paint stripper. A paint stripper helps the paint lift from the wood, and then you can use the pressure washer to remove the paint effectively. To increase the longevity of the wood, you want to avoid using more than 1000 PSI on your pressure washer, as too much moisture will penetrate the wood and may cause mildew or rot.

It depends on the type of surface, but if you’re preparing to pressure wash a driveway, you’ll start by using a broom or leaf blower to get rid of dirt, leaves, and other debris. Then, move any nearby items (like outdoor furniture and potted plants) and cover in-ground plants with a tarp or plastic sheet. After that, you can apply degreaser spray or another pretreatment solution to any stains and scrub them with a stiff brush before pressure washing.

Sodium bicarbonate does not need to be cleaned up as thoroughly as many of its aggregate counterparts because it is not considered dangerous to the environment, nor to pets or people. While you will likely want to clean up the dust with a shop-vac and some water for aesthetic and comfort reasons, soda blasting cleanup is much simpler than for most sandblasting.

Yes, you should consider power washing your home’s exterior before painting. This method can remove dirt, grime, and loose paint in a quick, efficient way. Wait three or four days after washing to paint, as it’s best to paint on a clean, dry surface. 

Soft washing might be a better option if your home’s exterior is vinyl or stucco. Before you start, make sure you know what parts of a house you can pressure wash (and those you can’t).