Top-rated sink installation pros.

Get matched with top sink installation pros in Philip, SD

Enter your zip and get matched with up to 5 pros

Need a pro for your sink installation project in Philip, SD?

Select your specific project to find the pro for you.

Find Sink installation pros in Philip

Avatar for American Home Shield – Home Warranty
American Home Shield – Home Warranty
3.5(
5,688
)

Serving Philip, SD and surrounding areas

In business since 1971

Credit card accepted

"AHS is ok. They cover repairs of most everything under the roof of your house. The companies that contract with them are not always the best. You call AHS with the issue, they send a fax to the repair company and give you the contact info. If they don't contact you within 24 hours, you call them. Sometimes they answer, sometimes they don't. When they arrive (usually three days or so later), they service the item. if it has issues within the 90 days, you call AHS again, they are sent out with no charge. If the serviceman decides the unit is unrepairable, AHS will allow you to choose a replacement from their listing (usually not as good as what you have) they will install and remove your old item, or give you wholesale amount to buy and install your own. Prices vary on what you want covered and what you want the copay to be, plus where you live. For me it is 49.99 per month with a 75.00 time of service order. You can have more than one item serviced at the same time under the same fee. If you have a SEAR product the repair guys are great. Not that wild about the other ones they send out. But it is a big savings compared to calling someone on your own. The cost of service is only the 75.00 copay."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+2

Recommended by65%of homeowners
Sink Installation questions, answered by experts

The standard kitchen sink size is typically 22 inches by 30 inches. However, kitchen sinks are available in a wide range of sizes to fit different kitchens, commonly from 25 to 39 inches long, though you can find even larger or custom sizes. When choosing a replacement, the easiest option is to select a sink that matches your existing one's dimensions. If you decide to install a larger sink, you will need to enlarge the cutout in your countertop; be sure to use the template that comes with the new sink to ensure a proper fit. Installing a smaller sink can be more complex, as it may require replacing the entire countertop.

Because it’s an engineered stone, quartz composite is much denser than other natural stone alternatives. For instance, if you drop a heavy object in a natural stone sink, there’s a chance the sink could crack, chip, or dent. Quartz’s density means quartz sinks are more resistant to scratches or staining. However, darker quartz sinks are more likely to show scratches or scuffs, and quartz sinks can stain over time.

Yes, a toilet, sink, and shower can share the same vent. This is a common installation method that can simplify plumbing and save space. However, there are important considerations. The vent and associated plumbing must be large enough to handle the demands of all fixtures without compromising the vent's effectiveness. Additionally, the toilet should always be located downstream of all other fixtures. Because requirements can vary and space might be limited, it is essential to check your local building and plumbing codes and consult with a qualified plumber to ensure the installation is done correctly.

Once you have your garbage disposal disconnected, you can remove the mounting bracket by unscrewing the bolts that are holding the bracket. You can back them out just enough to pop off the snap ring, which prevents the bottom portion of the bracket from disconnecting from the top when you unscrew the bolts. Use a regular screwdriver to pop off the snap ring, and the rest of the components should fall off by themselves.

Yes, there are different size sink drains, but a 1 ½-inch-diameter drain is the most common modern drain size. However, some sink drains are 2 inches or 3 inches in diameter. A bathroom sink drain is 1 ¼ inches in diameter, and kitchen sink drainpipes are 1 ½ inches in diameter.

The Philip, SD homeowners’ guide to sink installation services

From average costs to expert advice, get all the answers you need to get your job done.