Get matched with top wallpaper removers in Madison, SD

Limewash can be removed from brick, but the method of removal will depend on how long the limewash has been on the brick. If the limewash has fully dried—which happens after about five days—you’ll need to use a diluted muriatic acid mixture to remove it. If there are multiple coats of limewash, you may need to apply the acid mixture several times to fully remove it from the brick.

To remove pre-pasted wallpaper, you’ll need to wet the wallpaper or steam it to loosen the paste on the back of the wallpaper. Spray the paper with water, then let it soak for 10 to 20 minutes. From there, you should be able to peel off the wallpaper. Then, you may need to follow up with a cleaning solution and a scraper to remove any remaining wallpaper paste on the walls.

No, you don’t always have to remove old wallpaper before applying a new layer. However, you should pull off the existing wallpaper if it’s cracked, peeling, or in poor condition. We’d also recommend against putting wallpaper over textured or dark-colored wallpaper because the old layer may be visible through the new one. In addition, if you try to hang new wallpaper over vinyl-coated wallpaper, the adhesive might not stick properly. 

The average cost to install or hang wallpaper is around $575 per room or project, with typical prices ranging from $200 to $1,500. Costs can be higher for custom or luxury products. Since project size varies, it's often helpful to estimate labor costs per square foot, which generally fall between $1 and $7, with an average of $4 per square foot. The total cost depends on several factors, including the quality and type of wallpaper, the size and type of the room, and whether old wallpaper must be removed first. Opting for less expensive materials like peel-and-stick wallpaper or choosing to do the installation yourself can lower the overall cost. For the most accurate estimate, it is best to have a professional inspect the space and provide a quote.