Get matched with top pressure washers in Herreid, SD

You don’t have to pressure wash your deck before painting. However, you must clean the deck, and pressure washing is one of the most efficient methods. Pressure washing quickly removes flaked paint, wood fibers, and embedded dirt. It also gets much deeper into the wood surface than manually scrubbing the deck—and the cleaner the deck, the better the paint can adhere. Ensure the wood is fully dry before applying paint.

Brick takes longer to dry than less porous materials like concrete. If you are waiting to spot clean, a full day of mild weather should do the trick. If you are waiting to paint or apply a finish or sealant, give it three to four days to ensure the brick is absolutely dry as a bone. You don’t want any residual moisture whatsoever before laying down paint or sealant. 

You can put a gentle cleaner such as distilled white vinegar, dish soap, or a degreaser in your pressure washer in a detergent injector. The attachment will mix your detergent with the water and spray it out. If you have stubborn stains on your driveway, a gentle cleaner in the attachment can help dissolve and remove those stains. Rinse the area with the pressure washer.

Yes, you can pressure wash gutters to remove debris, dirt, and grime, but it should be done with care. High-pressure settings can bend or dent aluminum gutters and potentially damage your roof, so it’s typically best to use a lower-pressure setting or a nozzle that disperses water over a wide area to minimize the risk of damage.