Get matched with top pressure washers in Gayville, SD

How often you should pressure wash your house is mainly dependent on where you live and how dirty the area gets. For example, you may want to clean the exterior of your house two or more times a year if you live in an area with a lot of rain and snow. On the flip side, you may only need to pressure wash your outdoor patio furniture every few years as it starts to lose its luster (or if you forget to cover it before a big storm).

You should wait until your pavers have completely dried and cured before pressure washing them. Wait at least three to five days, though some sealants may need up to an entire week. Rushing that timeline can mess with the finish, weaken the seal, or leave streaks that are tough to fix. Once the sealant has fully set, stick to a gentle approach. Keep the pressure under 1,500 PSI and hold the nozzle at least two feet from the surface. Anything stronger or closer can blast the joint sand loose or wear down the sealant you just applied.

You can get more pressure out of your pressure washer by adjusting the pressure control knob clockwise to increase pressure (+). You can also check your nozzle for debris and clogs and remove anything you find with needle nose pliers. Switch to a nozzle with a lower-degree spray angle or a turbo nozzle to achieve more pressure at the tip. Check for leaks in the hose and connections, and make sure your water supply is offering enough pressure. 

Combining power and soft washing is a great way to ensure that all surfaces, both fragile and not, get the attention they deserve. Start by power or pressure washing durable materials like vinyl siding and concrete pavement or driveways, then switch the tips on your machine and finish up by soft washing the more delicate elements, like shutters and front doors, for example.