Get matched with top locksmiths in Corsica, SD

It’s possible, but depends on the design of your lock. Some door locks that lack a keyhole do boast a small hole on the exterior handle or knob. This hole’s primary function is to allow water to drain out of the lock, in addition to giving homeowners an easy spot to insert lubrication. However, you can typically use a paperclip in this pinhole to unlock the door by manipulating the mechanism inside. 

If part of the key is protruding out of the lock, you can use a pair of needle-nosed pliers or tweezers to gently turn the key in the lock to open the door. If the key is fully inserted into the lock, you may also be able to use a key extractor to help turn the key into the unlocked position. 

But if the key breaks off halfway into the lock or you simply can’t reach it to help engage the unlocking mechanisms, you should probably call a professional.

If your door handle turns without opening, the most likely culprit is a loose or stripped spindle. This part connects the handles to the latch mechanism, and when it’s not properly engaged, turning the handle does nothing. Other issues might include a broken latch, loose screws, or even something small blocking an inner mechanism. In any case, it’s usually a matter of tightening, adjusting, or replacing a worn-out part inside the handle assembly—or calling in a professional to do it for you.

When the temps drop, sometimes you need to thaw a lock to regain access. Options include warming the key with warm water, applying a de-icing spray, or using a hair dryer on low heat. Avoid using boiling water to prevent damage. To prevent future freezing, consider installing a cover or shield over the lock to keep water and ice out. Remember to be patient and gentle during thawing to avoid damaging the lock or key. If all else fails, consult a professional locksmith.