Question 1

How do bathtub liners work?

Accepted Answer

•

A bathtub liner is a one-piece insert that goes on top of your tub to conceal cracks, blemishes, and discoloration. Liners are made from acrylic or PVC plastic. It’s best to purchase a custom bathtub liner that matches your existing tub's size, shape, and contours, but premade liners are less expensive and also get the job done. Some bathtub liners come with a wall or shower surround to refurbish the area above the bathtub.

Question 2

Can you fix a hole in a plastic bathtub?

Accepted Answer

•

You're more likely to accidentally crack your plastic tub rather than successfully fixing a hole. You can fix hairline cracks and larger stress cracks with a plastic tub crack repair kit from a home improvement store. You'll need to clean out the tub, apply either the epoxy resin or filler putty compound into the crack, let it dry, and then sand it out.

Depending on your budget, you might consider a new tub as part of your bathroom remodel costs. It could be a good opportunity to update everything after considering all of the bathroom remodel ideas out there.

Question 3

Is it less expensive to resurface or replace a bathtub?

Accepted Answer

•

Resurfacing a bathtub is less expensive than replacing one. Resurfacing a tub costs about $330 to $630, depending on the material, while replacing a tub costs an average of $4,150. But remember that resurfacing is a temporary solution for a worn-out tub, and you may need to refinish a tub every few years to keep it looking new.

Question 4

What are the benefits of resurfacing or refacing bathtubs and surfaces?

Accepted Answer

•

Resurfacing or refacing extends the life of existing surfaces, saves on replacement costs, and reduces waste, offering a refreshed look with less downtime.

Question 5

How long does it take to refinish a bathtub?

Accepted Answer

•

For a standard-sized bathtub with minor damage, it takes approximately 3 to 5 hours to refinish. It might take a bit longer if your bathtub refinishing contractor needs to fill in significant cracks or gouges. This is the same if you have a specialty tub, like an oversized bathtub—you can expect your pro to take a bit on the longer side.